738033
10
Zoom out
Zoom in
Previous page
1/28
Next page
Assembling Bike to Base Frame
Step 1: Carefully lower the bike onto the base frame over the base screws, with the front of the bike facing the transport
wheels on the Base Frame.
Step 2: Insert one washer on each of the four base frame studs.
Step 3: Install the acorn nuts on the studs and hand tighten. Torque the acorn nuts with a 16mm or 5/8” crowfoot and
torque wrench to 45 Nm (35 ft-lbs) using a 16mm, or 5/8 inch open-end wrench to hold in position.
1 3
Assembling Pedal to Crank Arm
Step 1: Unwrap the pedal set and Loctite 242, obtain the
Torque wrench, 15mm crowfoot, 4” extension, and 15mm
open-end wrench.
Step 2: With a clean cloth, wipe the threaded area of the
pedals. Apply Loctite 242 to the pedal threads. Install
the pedals into the crank arms, use the 15mm open-end
wrench to tighten. Finish with the torque wrench, 15mm
crowfoot, and 4” extension. Torque pedals to 45 Nm (35
ft-lbs).
NOTE: Left pedal is LH threads and right pedal is RH
threads.
WARNING! Failing to install the pedals with Loctite 242, or
crossing the threads will damage them, and could result in
serious injury to the user.
8
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keiser M3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keiser M3 in the language / languages: English as an attachment in your email.

The manual is 44,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info