738033
9
Zoom out
Zoom in
Previous page
1/28
Next page
Mounting Handlebar Assembly
NOTE: If installing the M3 computer please do so before mounting the handle bars. When the computer installation is
complete please return to this step.
Step 1: Obtain the handlebar assembly, 6mm Allen wrench, and the socket head cap screws (M8x1.25 X 12 SS). Observe
the location of the two mounting anges on the handlebar post. Place the handlebar assembly on the post mounts,
aligning the mounting holes.
Step 2: Tilt the handlebar assembly slightly to place the socket head cap screws (M8x1.25 X 12 SS) into the mounting
holes. Once each screw has been started, place the palm of one hand on the center of the handlebar pressing rmly and
evenly onto the handlebar post. With the other hand tighten each screw with the Allen wrench until the head of each screw
just makes contact with each hole. Now tighten each screw evenly.
Computer Battery Replacement
To test the computer batteries rotate the crank
arm until the computer “wakes up”. If the battery is
low, a “LO-BA” will display in the odometer (ODO)
display at the bottom of the computer. To replace
the batteries unscrew the back of the computer
housing and remove old AA batteries and replace
with a set of two new AA batteries. If you have
multiple bikes, we suggest all computer batteries be
changed at the same time.
1
2
7
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Keiser M3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Keiser M3 in the language / languages: English as an attachment in your email.

The manual is 44,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info