771410
25
Zoom out
Zoom in
Previous page
1/41
Next page
First open the front panel, then remove the
lower panel.
Open the
wire cover
Terminal
block
Cable
clamp
Rat baffle (some units)
Knock-out
panel
Page 25
Rated Current of
Appliance (A)
Nominal Cross-
Sectional Area (mm²)
> 3 and 6 0.75
> 6 and 10 1
> 10 and 16 1.5
> 16 and 25 2.5
> 25 and 32 4
> 32 and 40 6
Step 6: Connect signal and power cables
The signal cable enables communication between the
indoor and outdoor units. You must first choose the
right cable size before preparing it for connection.
Cable Types
Indoor Power Cable (if applicable): H05VV-F or
H05V2V2-F
Outdoor Power Cable: H07RN-F or H05RN-F
Signal Cable: H07RN-F
Minimum Cross-Sectional Area of Power
and Signal Cables (For reference)
CHOOSE THE RIGHT CABLE SIZE
The size of the power supply cable, signal cable, fuse,
and switch needed is determined by the maximum
current of the unit. The maximum current is indicated
on the nameplate located on the side panel of the unit.
Refer to this nameplate to choose the right cable, fuse,
or switch.
1. Open and fix the position of the panel, then, open
the covers of the two lock blocks, unscrew the
screw, then hold both sides of the lower panel
in the place marked "PULL", pull it upwards to
release the buckles, then take the lower panel
down (please refer to Page 22-23).
2. Open the wire box cover to connect the cable.
3. Unscrew the cable clamp below the terminal block
and place it to the side.
4. Facing the back of the unit, remove the plastic
panel on the bottom left-hand side.
WARNING
ALL WIRING MUST BE PERFORMED STRICTLY IN
ACCORDANCE WITH THE WIRING DIAGRAM LOCATED
ON THE BACK OF THE INDOOR UNIT'S FRONT PANEL.
5. Feed the signal wire through this slot, from the back of
the unit to the front.
6. Facing the front of the unit, connect the wire according
to the indoor unit's wiring diagram, connect the u-lug
and firmly screw each wire to its corresponding terminal.
NOTE: If the size of the cable is too big, remove the middle
small plastic knock-out panel to create a slot through which
the cable can exit. If you want to remove the chassis or drain
hose, please remove the rat baffle first.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun Prodigy Pro Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun Prodigy Pro Series in the language / languages: English as an attachment in your email.

The manual is 4.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun Prodigy Pro Series

Kaysun Prodigy Pro Series User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info