771578
24
Zoom out
Zoom in
Previous page
1/64
Next page
24
7 - AERAULIC CONNECTIONS
The unit must be installed inside the building, preferably in a technical room or a laundry room or a garage.
At any rate, it is always preferable to avoid installing the unit near bedrooms or in rooms that must be protected from noise.
Outdoor installation is prohibited, as well as installation in places subject to external weather.
Examples below refer to the 190 version. For the 300 version, the expulsion and intake connections are inverted.
Aeraulic Connections
Channelling the intake and expulsion through ducts allows the unit to function with air taken from outside the house. Heat is
extracted from the outdoor air, and used as a source for the heat pump.
Later this same air is expelled outside the building.
Therefore, unit operation does not cause an increase in heating requirements in the home. It is necessary to fit the system with
correctly sized pipes in relation to the available pressure head supplied by the unit.
INTAKE AND EXPULSION DUCTS (recommended)
Installation with an intake duct and free expulsion is
recommended if there is a desire to use the air expelled by
the unit, cold dehumidified air (5-10°C colder than the
intake air), to cool the room.
The unit must be installed preferably in a room that does
not require heating, because the unit releases cold air into
the environment and it would increase the cost of heating
that room.
The unit must be installed in a room with a minimum
volume greater than 15m2. The expulsion air flow must be
guaranteed and cannot be blocked. It is necessary that the
vents be correctly sized.
INTAKE DUCTS (conditioned)
EXPULSION DUCTS (conditioned)
In this particular type of installation, the unit takes in air
from the room where it is installed, extracts the heat and
then expels that air outside the house.
The unit must be installed in a room with suitable
openings to allow the correct flow of air into the unit,
which would prevent the air pressure in the room from
falling. The unit must be installed in a room with a
minimum volume greater than 15m2.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun COMPAK KHPA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun COMPAK KHPA in the language / languages: English as an attachment in your email.

The manual is 14.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info