771408
32
Zoom out
Zoom in
Previous page
1/36
Next page
Check-point of indoor unit
Check-point of outdoor unit
A: Low pressure stop valve
B: High pressure stop valve
C & D: Indoor unit are nuts
Page 32
11. Electrical and Gas Leak Checks
Before Test Run
Only perform test run after you have completed the
following steps:
Electrical Safety Checks Conrm that the unit's
electrical system is safe and operating properly.
Gas Leak Checks Check all are nut connections
and conrm that the system is not leaking
Conrm that gas and liquid (high and low pressure)
valves are fully open
Electrical Safety Checks
After installation, conrm that all electrical wiring is
installed in accordance with local and national regulations,
and according to the Installation Manual.
BEFORE TEST RUN
Check Grounding Work
Measure grounding resistance by visual detection and
with grounding resistance tester. Grounding resistance
must be less than 0.1Ω.
DURING TEST RUN
Check for Electrical Leakage
During the Test Run, use an electroprobe and multimeter
to perform a comprehensive electrical leakage test.
If electrical leakage is detected, turn off the unit
immediately and call a licensed electrician to nd and
resolve the cause of the leakage.
WARNING – RISK OF ELECTRIC
SHOCK
ALL WIRING MUST COMPLY WITH LOCAL AND
NATIONAL ELECTRICAL CODES, AND MUST BE
INSTALLED BY A LICENSED ELECTRICIAN.
Gas Leak Checks
There are two different methods to check for gas leaks.
Soap and Water Method
Using a soft brush, apply soapy water or liquid detergent
to all pipe connection points on the indoor unit and outdoor
unit. The presence of bubbles indicates a leak.
Leak Detector Method
If using leak detector, refer to the device's operation
manual for proper usage instructions.
AFTER PERFORMING GAS LEAK
CHECKS
After conrming that the all pipe connection points DO
NOT leak, replace the valve cover on the outside unit.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kaysun AKAY-CF 52 DR10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kaysun AKAY-CF 52 DR10 in the language / languages: English as an attachment in your email.

The manual is 3.88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kaysun AKAY-CF 52 DR10

Kaysun AKAY-CF 52 DR10 User Manual - German - 36 pages

Kaysun AKAY-CF 52 DR10 User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info