631835
35
Zoom out
Zoom in
Previous page
1/64
Next page
35
MEASURING FUNCTION: TP SCAN MODE
SCR (also SCIF or single cable systems)
The 2
nd
softkey is used to select the system type.
Type 1 offers a range of four output or transmission frequencies.
Type 2 offers a range of eight output or transmission frequencies.
There are also further detail differences between the types which are however not relevant to operation
of the system.
The 3
rd
softkey is now used to select the system output frequency to be measured.
The 4
th
softkey is used to select between two satellite positions the vertical and horizontal Sat polarisation
for each.
The selected individual output carrier (UB = user band) can also be switched off here.
The 5
th
softkey gives access to the column in which the desired satellite transponder frequency can be
input, and underneath it also the appropriate modulation oscillator.
There are also explanatory tables under “Overview of the most important DiSEqC
TM
commands”.
Pressing the
button now sends the respective DiSEqC
TM
command to the Sat system, and
thereby implements the desired appropriate transponder frequency. To show the user what settings have
been transmitted, the input is highlighted in green.
SCR in User mode (by type, in the 2
nd
column)
The 2
nd
softkey is used to set the user mode (your own SCR frequencies).
The 3
rd
softkey is now used to select the appropriate output frequency of the system, previously set
individually. These user SCR frequencies are required in the measurement mode (TP scan). They are
input here in the column of the 3
rd
softkey and are saved when the satellite meter is switched off.
The 4
th
softkey is used to select between two satellite positions the vertical and horizontal Sat polarisation
for each.
The selected individual output carrier (UB = user band) can also be switched off here.
The 5
th
softkey gives access to the column in which the desired satellite transponder frequency can be
input, and underneath it also the appropriate modulation oscillator.
There are also explanatory tables under “Overview of the most important DiSEqC
TM
commands”.
Pressing the
button now sends the respective DiSEqC
TM
command to the Sat system, and
thereby implements the desired appropriate transponder frequency.
“Test SCIF” switches on all the SCR carriers (output frequencies) to the single-cable system.
Pressing “All Off” brie y interrupts the DC power supply to the single-cable system, thereby resetting
these SCR carriers again.
However many SCR matrices have their own power supply, so to reset the SCR carriers by brie y
interrupting their power supply it is necessary to withdraw the mains plug and reinsert it.
To show the user what settings have been
transmitted, the input is highlighted in green.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein MSK 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein MSK 120 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein MSK 120

Kathrein MSK 120 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info