631835
37
Zoom out
Zoom in
Previous page
1/64
Next page
37
MEASURING FUNCTION: LNB/MATRIX SETTINGS
LNB-DC antenna control
Use the cursor buttons ▲▼ to select “LNB-DC”.
Then press the 2
nd
softkey button “Pol” to input the
horizontal/vertical changeover and use the cursor
buttons ▲▼ to select the desired polarisation.
You can also switch off the LNB voltage by selecting
“Off” here.
Then press the 3
rd
softkey button “Band” to switch
between high band and low band and use the cursor
buttons ▲▼ to select the desired band.
As soon as you con rm by pressing the
button, your settings will be executed.
The change-over to the various Sat levels can be tracked at the spectrum.
The cursor buttons ◄► allow the marker in the frequency to be changed. As soon as the demodulator is
“Locked”, the marker bandwidth is adjusted automatically to suit and the digital level is measured.
You can then press the
button to switch to a channel scan in order to decode the selected transponder
and perform further measurements.
First press the 1
st
softkey and then use the cursor
buttons ▲▼ to select “DiSEqC
TM
”.
Then press the 2
nd
softkey button “Pos 1/2” or the
3
rd
softkey button “Pos 3/4” to select the horizontal/
vertical changeover and use the cursor buttons ▲▼
to select the desired satellite position and the type of
polarisation.
The associated DiSEqC
TM
command is displayed
here.
As soon as you con rm the selection with the
button the DiSEqC
TM
command will be transmitted.
The change-over to the various Sat levels can be tracked at the spectrum.
The cursor buttons ◄► allow the marker in the frequency to be changed. As soon as the demodulator is
“Locked”, the marker bandwidth is adjusted automatically to suit and the digital level is measured.
You can then press the
button to switch to a scan in order to decode the selected transponder and
perform further measurements.
These antenna settings are maintained until you select “TV receiver mode” using
the
button!
DiSEqC
TM
antenna control
Press the
button to call up manual antenna setting.
Satellite systems using a universal LNB
Using the 1
st
softkey button “Mode” and the cursor buttons ▲▼, four different types of antenna control are
available for selection: “LNB-DC”, “DiSEqC
TM
”, “SCR” (SCIF) and DiSEqC
TM
“User” input.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein MSK 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein MSK 120 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein MSK 120

Kathrein MSK 120 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info