631835
34
Zoom out
Zoom in
Previous page
1/64
Next page
34
MEASURING FUNCTION: TP SCAN MODE
Function: In order to meter a satellite transponder in “TP Scan” mode, access the menu
and set the desired Sat level and frequency modulation.
These inputs are then saved for the respective SAT level.
There are four different LNB controller operating modes for the 1
st
softkey menu.
The respective submenus are different depending on the function selected for the 1
st
softkey.
LNB-DC (analogous to DC voltage control)
The 2
nd
softkey is used to set the control voltage for the polarisation change-over.
The 3
rd
softkey is used as required to connect the 22 kHz switching signal (to select high band as
required).
Please use the 4
th
softkey to set the desired modulation oscillator.
For universal LNBs the settings used are usually 9,750 MHz for low band and 10,600 MHz for high band.
DiSEqC
TM
(control signal based on 22 kHz)
The 2
nd
softkey is used to select a Sat level for satellite 1 or 2 from a previously saved satellite list.
The 3
rd
softkey is used to select a Sat level for satellite 3 or 4 from a previously saved satellite list.
Please now use the 4
th
softkey to set the correct modulation oscillator for each.
The associated DiSEqC
TM
command is now displayed in the 5
th
column (command ...).
Pressing the
button sends the respective DiSEqC
TM
command to the Sat system, and thereby
switches on the desired Sat level.
The preset oscillator frequencies can be overwritten
as required in the “LO-Freq” menu, using the number
keys.
After the
has been pressed, the desired Sat
level is now set. To show the user what settings have
been transmitted, the input is highlighted in green.
To show the user what settings have been
transmitted, the input is highlighted in green.
The associated DiSEqC
TM
command is displayed
here.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein MSK 120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein MSK 120 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein MSK 120

Kathrein MSK 120 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info