631709
22
Zoom out
Zoom in
Previous page
1/64
Next page
22 from 64
Installation and connection
5
3
4
Screw attachment
Left Right
Remove the wood screws supplied from their transport attachment on the top of the respective mounting
piece (2 pieces).
Place the two mounting pieces on your
receiver as shown in Figures
.
During the process the following should be
taken into account:
1. Left (L) and Right (R) markings (see
the arrows Fig. )
2. The teeth on the underside of the
mounting pieces must be inserted in
therstandlastrowoftheventilation
slots on the top of the receiver (see
the arrows in Fig. )
Now hold the receiver, with the installation kit attached, at
the installation location. Screw in the wood screws supplied
through the smaller holes in the screw attachment area (4 x)
(see Fig. ). Wherever possible, use the wood screws sup-
plied. If these are unsuitable, other screws of adequate size and
strength can be used. However, under no circumstances use
countersunk wood screws, since these can damage the
attachment area (see Fig. ).
Then screw all four screws fully home, so that the installation kit
is no longer able to come free.
Forsubsequentdisassemblyitissufcienttoundoallscrewsoneturneachand
to push the receiver to the right (suspended) or left (on top) to release it.
2
5.6.4 Suspended installation
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 730 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 730 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 730 - MobiSet 3 Twin

Kathrein CAP 730 - MobiSet 3 Twin User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info