631709
21
Zoom out
Zoom in
Previous page
1/64
Next page
21 from 64
Attaching the infrared sensor
You can attach the infrared sensor directly to the unit; or if the receiver
is installed in a concealed location, you should position the infrared
sensor where it can be clearly seen by the remote control unit.
The infrared sensor is installed with the aid of the supplied adhesive
stripontheatunderside.
5.6.2 Preparations
5.6.3 Important instructions for installation
Warning
Danger to life from electric shock. Do not use the wood screws that had been included
with the receiver to mount the receiver onto a TV set or other electrical device. The wood
screws could make contact with electrically live parts.
Important
Under no circumstances use countersunk-head screws for installation (see
the diagram on the right), since these can damage the screw sockets on
the receiver. Wherever possible, use the wood screws supplied with the
receiver.
Before installing the receiver so that it is attached to another piece of equip-
ment (such as a TV set), check with the manufacturer of that equipment or
by reference to the documentation supplied with it whether this is permis-
sible,andifsowhatttings(screws,etc.)youneed/canuseforthis.The
temperature rise of each of the units in operation (receiver/TV set) can in some circum-
stances affect the other unit.
Connections and fusing of the unit
All the connecting cables for connection to the receiver (including the infrared sensor) are connected at the
rearoftheunit(seealso5.6.9,p.25).Whenselectingtheinstallationlocation,allowsufcientclearance
at the rear of the unit for these cables and their plugs.
On the left hand side of the receiver viewed from the front there is a fuse inserted from the outside. This
fuse (for the type, see the section “Important Information” in the receiver operating manual) should be
accessible even after the unit has been installed, so that it can easily be exchanged if required.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 730 - MobiSet 3 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 730 - MobiSet 3 Twin in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 730 - MobiSet 3 Twin

Kathrein CAP 730 - MobiSet 3 Twin User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info