724919
9
Zoom out
Zoom in
Previous page
1/144
Next page
English 9
manufacturing defect is the cause. In a war-
ranty case, please contact your dealer (with
the purchase receipt) or the next author-
ised customer service site.
(See overleaf for the address)
Device description
The maximum amount of equipment is de-
scribed in these operating instructions. De-
pending on the model used, there are dif-
ferences in the scope of delivery (see pack-
aging).
For the figures, please refer to the graphics
page
Illustration A
1 Carrying handle
2 Power supply cable with plug
3 Automatic venting device
4 Quick-Connect hose connection
5 Pipe unions
6 Lock for float switch
7 Height adjustment for float switch
8 Float switch
9 Setting for filter basket
10 Filter basket
Installation
Installing the hose
Note
The pumping capacity is further increased
the shorter the hose is and the greater the
hose diameter is.
The pipe union is enclosed unmounted with
the device.
1. Slide the hose clamp onto the hose.
Illustration B
2. When using a hose with a diameter of ¾"
or 1":
a Screw the pump connecting piece
(see chapter Accessories and spare
parts) onto the pipe union.
b Shorten the pump connecting piece
using the grooves, according to the
selected hose diameter.
The flow volume is increased.
c Slide the hose onto the pump connect-
ing piece.
3. When using a hose with a diameter of
1¼", slide the hose onto the pipe union.
4. Fasten the hose on the pipe union using
the hose clamp.
Initial startup
CAUTION
Improper transportation
Risk of injury and damage
Do not carry the pump using the cable or
hose.
1. Plug the pipe union into Quick-Connect.
The hose is connected up.
2. Lock in place the float switch at the
height adjustment.
Illustration C
3. Position the pump in the feed fluid:
Fasten a rope to the carrying handle
and immerse the pump.
Set down the pump horizontally on
firm ground. If the ground is muddy,
use a brick or something similar for
stabilising.
4. Ensure that the suction area is not
blocked.
Operation
Automatic venting
If the fluid level is low, any sucked-in air, or
air present in the pump, may escape via the
automatic venting device. Fluid can also
leak along with air.
Illustration D
Setting the filter basket
The filter basket can be operated in 2 posi-
tions.
Illustration E
1. Put the pump on the ground.
Waste water and clear water de-
livery
We would recommend this filter
basket position at the start of the
pumping process, since on this
occasion the pumping capacity is
at its greatest.
Flat vacuuming
In this filter basket position, flat
vacuuming is possible up to 1 mm
residual fluid height in manual
mode.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Karcher SP 5 Dual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Karcher SP 5 Dual in the language / languages: All languages as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info