Manual Kalkhoff Rohloff SpeedHub 500-14 (page 34 of 114) (English, German, Dutch, French, Italian)

780095

Zoom out

Zoom in

1/114

Pullshiftercable1totheendstop.

Thetwistshifterwillturnover

gearindicator#14toitsendstop

andshiftercable14getspulled

back.

Pullbothshiftercablestotheend

stopinturntomakesurethatthe

cablehousingssitcorrectlyinthe

cablestops. Whenpullingshifter

cable14,thetwistshiftershould

turninthedirectionofgear

indicator#1. Whenpullingshifter

cable1thetwistshiftershouldturn

inthedirectionofgearindicator

#14.Shouldthisnotbethecase,

switchoverthecableswithinthe

cableguide.

Selectgear#14.Dothisbyholding

therearhubcable14bythe

bayonetconnectorandpullingthis

throughallthegearsuntiltheend

stopisreached(end position=gear

#14).

Threadshiftercable1fromthe

twistshifterintothecableadjuster

1atthecableguide.Dothesame

forshiftercable14intocable

adjuster14.

Withalittlegreaseonthebolt,

screwthecablestopontothebrake

boss. Thecablestopshouldbe

heldinpositionwitha13mm

wrenchduringthisprocess. This

ensuresthatthecableadjusters

faceinthecorrectpositiononce

thecablestopissecure.

Mounting

Theshiftercablemeasurementtool

(Art.#8506)canbeusedforeasy

andprecisemeasurementofthe

shiftercablelength.

Thefollowingstepsshowhowto

correctlymeasuretheshiftercable

lengthwithoutthehelpofthis

specialtool.

P O I N T E R

1211

6-8mm

Pullhubcable14outbythe

bayonetconnectoruntilitsend

stopandholditupagainstshifter

cable14.Cuttheshiftercableat

thepointlevelwiththetopofthe

bayonetconnector.

Unscrewboththeheadlessscrews

ofthefemaleconnectorbyapprox.

2mm.Placethefemaleconnector

overthemalebayonetconnector.

Threadtheshortenedshiftercable

14fullyintotheholeofbayonet

connector14(approx.10mmdeep).

Pullhubcable1outbythebayonet

connectoruntilitsendstop. The

connectedshiftercable14will

automaticallybepulledinthe

otherdirection.Pullshiftercable1

tight,sothatthecableistensioned

andholditupagainsthubcable1.

Cuttheshiftercableatthepoint

levelwiththetopofthebayonet

connector.

Tightenuponeoftheheadless

screwsuntilitisflushwiththe

outsideofthefemaleconnector.

Nowtightenuptheotherheadless

screw.(M4 4-2mmallenkey,

tighteningtorque1.5Nm/12in.lbs.).

Male

connector

Female

connector

Male

connector1

Mounting

Bothcableadjustersmustbe

unscrewedapprox.twoturnsfrom

thecableguide.

Pullshiftercableuntilthegear

indicator#14onthetwistshifter

meetsupwiththereddotofthe

twistshifterbody.

P O I N T E R

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Rohloff SpeedHub 500-14 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 40.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kalkhoff Rohloff SpeedHub 500-14 Manual

Product: