516382
22
Zoom out
Zoom in
Previous page
1/76
Next page
20 Quickstart Guide – Impulse
EN
3.1 System check on Pedelecs
with back-pedal brakes
The system check veries whether the
switch for operating the back-pedal brake
is working correctly.
If your Pedelec is equipped with an LED
control panel:
1. Push the Power button on the control
panel on the handlebar.
2. The system will now perform a sys-
tem check. At this time, the le-hand
LED will light up for approx. two sec-
onds, followed by all LEDs for approx.
one second. If you set o now, the
system will normally detect a pedal
movement in the “drive” and “back-
pedal brake” directions. This completes
the safety check, and you can ride as
normal with assistance. If you cannot
feel any assistance, simply backpedal
briey and then pedal forwards again to
trigger the system check. In the event
that the LEDs continue to ash in the
pattern described above and the motor
is not providing any assistance, then
you should consult a specialist dealer.
Aer all ve LEDs have gone out, the
battery is lly charged.
If the LED of the charger ashes red
permanently, a charging fault has
developed.
In that case, take the battery out of the
charger, then put it back in. The charger
tests the battery and performs readjust-
ments, if required. If the LED on the
charger still ashes, take the charger
and battery to your specialist dealer. He
will test the devices and replace them,
if required.
8. If you have charged the battery in
the docking station, reinsert the battery
into the holder on the Pedelec om the
le-hand side. Tilt the battery outwards
at an angle of roughly 45° as you do so,
as you did when you took it out of the
holder. Move the battery into the up-
right position until the locking mecha-
nism engages. If the key is still in the
lock, you will need to turn it clockwise
and pull it out as otherwise the battery
will not lock in place.
9. Make sure that the battery is securely
positioned and that the key is no longer
in the lock.
22


Need help? Post your question in this forum.

Forumrules
1

Forum

kalkhoff-pedelec-impulse

Reset search

  • My motor stops working more adn more frequently. I have to turn the battery on and off again to fix for a few days or seconds. I have made sure the magnet is correctly placed.

    When turning off I get an error code COO5. What must I do? Submitted on 31-1-2021 at 14:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Pedelec Impulse at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Pedelec Impulse in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Pedelec Impulse

Kalkhoff Pedelec Impulse User Manual - English, German - 48 pages

Kalkhoff Pedelec Impulse User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info