516382
21
Zoom out
Zoom in
Previous page
1/76
Next page
Quickstart Guide – Impulse 19
EN
please observe type plate on the
charger).
To charge the battery safely, the charger
must be placed on a suitable surface
resting on its four feet with the LED
facing upwards. This is the only way to
ensure that the hot air around the bat-
tery warmed during the charging opera-
tion can dissipate via the surrounding
ventilation slots.
5. Connect the charger to the docking
station. The LED in the docking station
now lights up briey in red and then
permanently in green.
6. Put the battery in the holder of
the docking station. The battery and
charger are connected. The LED in the
charger lights up in green.
Battery in the docking station
7. The charging operation starts. The
LED in the charger now lights up green.
The battery LEDs light up one by one to
indicate the progress of the charging
operation. The battery is charged in ve
stages. When charging of one stage is in
progress, the corresponding LED ash-
es. If this stage has been lly charged,
the LED will light up permanently. Now
the next LED will begin to ash.
You must lly charge the battery before
using it for the rst time.
4. Once all LEDs on the battery have
gone out, pull the charger plug out of
the battery socket. Swivel the cover
back over the charging socket.
You can also take the battery out of the
holder and charge it in the docking sta-
tion. This is recommended if it is cold
outside, in order to charge the battery in
a warm room.
1. Grip the battery by the handle, in-
sert the key into the lock and turn it
anticlockwise.
2. Now the battery is unlocked and can
be removed. To remove it, tilt the Pe-
delec to one side. In doing so, hold on
tight to the battery to prevent it om
being dropped.
3. You should now remove the key and
keep it in a safe place to prevent it om
breaking o or being lost.
4. Take the charger and docking station
provided out of its packaging and plug
the mains plug into a socket (230 V,
21


Need help? Post your question in this forum.

Forumrules
1

Forum

kalkhoff-pedelec-impulse

Reset search

  • My motor stops working more adn more frequently. I have to turn the battery on and off again to fix for a few days or seconds. I have made sure the magnet is correctly placed.

    When turning off I get an error code COO5. What must I do? Submitted on 31-1-2021 at 14:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Pedelec Impulse at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Pedelec Impulse in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Pedelec Impulse

Kalkhoff Pedelec Impulse User Manual - English, German - 48 pages

Kalkhoff Pedelec Impulse User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info