725632
18
Zoom out
Zoom in
Previous page
1/64
Next page
EN-18 Original User Guide | Pedelec Integrale 0.5 Version 2
3.6 Adjusting the headset
DANGER
We recommend asking your cycle dealer to assemble and adjust
the bike.
Please use a torque wrench to tighten the bolts, and observe
the prescribed tightening torque. Failure to comply can result in
screws/bolts becoming loose, tearing away or fracturing. If that
happens while you are riding the bike, components may come o
and you could have a severe crash. If screws are overtightened,
components can also be damaged. If you are unsure how to set
the tightening torque, please ask your cycle dealer.
There are two ways of testing whether the headset
for your bicycle is too tight or too loose:
1. Grip the lower spacer with your thumb and
forenger. Squeeze the front brake and move the
wheel backward and forward. If the headset is
too loose, there will be signicant bucking at the
lower spacer.
3.4 Tilting the saddle
1. To alter the tilt of the saddle, loosen the front saddle clamping bolt
(M6) by turning it anticlockwise using a 5 mm Allen key. Turn the
saddle clamping bolt completely two to three times at most, otherwise
the whole mechanism could fall apart.
2. Tilt the bicycle saddle to the desired angle.
3. Tighten the front saddle clamping bolt again by the same number of
turns.
4. Ensure that the newly-tightened saddle does not tip; test it by pressing
down on the front and back alternately.
3.5 Handlebar height
DANGER
Do not alter the handlebar height! Otherwise, the fork steerer may
break and you will seriously injure yourself.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Neodrives Integrale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Neodrives Integrale in the language / languages: English as an attachment in your email.

The manual is 9,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Neodrives Integrale

Kalkhoff Neodrives Integrale User Manual - German - 66 pages

Kalkhoff Neodrives Integrale User Manual - Dutch - 64 pages

Kalkhoff Neodrives Integrale User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info