725632
17
Zoom out
Zoom in
Previous page
1/64
Next page
Original User Guide | Pedelec Integrale 0.5 Version 2 EN-17
3.3 Moving the saddle
DANGER
Screw the clamping screws fully in a straight position in the nuts.
Failure to do so can result in the screws tearing out of the nuts.
correct
Front seat clamping bolts
wrong
Fig. 1 Fig. 2
1. To move the saddle, loosen the front and rear saddle clamping bolts
(M6) by turning them anticlockwise with a 5 mm Allen key. Turn
the saddle clamping bolts completely two to three times at most,
otherwise the whole mechanism could fall apart.
2. Move the saddle backwards or forwards as required.
DANGER
Never clamp the saddle in the curve of the saddle rail; always do it in
the straight section. Only shift the saddle within the straight section
(Fig. 1). Saddles that stay clamped outside this area can fail (Fig. 2).
correct
Rear seat
clamping bolts
Fig. 1
wrong
Fig. 2
3. Tighten the two saddle clamping
bolts by turning them clockwise with
a torque of 12 Nm using a torque
wrench.
DANGER
Observe the prescribed tightening torque. Failure to comply can
result in screws/bolts becoming loose, tearing away or fracturing. If
that happens while you are riding the bike, components may come
o and you could have a severe crash. If screws are overtightened,
components can also be damaged.
If no value is shown on the component, use the torque settings from
Section 9. Torque settings Page EN-63
For 3. Tightening the bolts
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Neodrives Integrale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Neodrives Integrale in the language / languages: English as an attachment in your email.

The manual is 9,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Neodrives Integrale

Kalkhoff Neodrives Integrale User Manual - German - 66 pages

Kalkhoff Neodrives Integrale User Manual - Dutch - 64 pages

Kalkhoff Neodrives Integrale User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info