725632
20
Zoom out
Zoom in
Previous page
1/64
Next page
EN-20 Original User Guide | Pedelec Integrale 0.5 Version 2
-Press the buttonFront light
Rear
3.8 Changing the angle of the front light
Proceed as follows to determine the correct light angle:
1. Position the Pedelec at a distance of 5 meters from a
wall.
2. Measure the height of the front light with a measuring
tape.
3. Mark the height of the front light on the wall.
4. Switch on the light.
5. Lift the front wheel slightly and rotate it so that the
front head lamp lights up.
6. If the light beam hits the wall above the height marking,
it will blind the oncoming trac. The brightest part of
the light beam should preferably be midway between
the ground and the height marking.
4. Before tightening the screws, align the lower spacer so that its
prole overlaps the top tube in the straight-ahead position.
5. Once the headset has been
adjusted as required, tighten
the M3 grub screw clockwise
with a 1.5 Nm torque. Use a
torque wrench to do this.
6. Tighten the M4 screw clockwise
with a 2 Nm torque.
3.7 Switchingthelightsonando
Switch the light on and o using the button on the easy-reach control.
If the light itself is tted with a switch, ensure that this is in the on
position. The lighting is powered by the Pedelec battery.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Neodrives Integrale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Neodrives Integrale in the language / languages: English as an attachment in your email.

The manual is 9,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff Neodrives Integrale

Kalkhoff Neodrives Integrale User Manual - German - 66 pages

Kalkhoff Neodrives Integrale User Manual - Dutch - 64 pages

Kalkhoff Neodrives Integrale User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info