778421
45
Zoom out
Zoom in
Previous page
1/70
Next page
Originalbetriebsanleitung Allgemein EN-45
5. Push the button on the display module until the LED
lights up to switch from Gearshift mode to Setting
mode.
6. Press button A on the
right-hand gear lever while
turning the front chainring
to move the idler pulley
inward until the chain
brushes against sprocket 4
and makes a noise.
7. Next, press button B on
the right-hand gear lever
4 times to move the idler
pulley 4 steps outward to the target position.
8. Push the button on the display module until the red
LED goes out to switch the rear derailleur from Setting
mode to Gearshift mode.
Button
Display module
Fig. 87 Pressing the button
©Shimano
Sprockets
Idler
pulley Gears
Button A Button B
Fig. 88 Setting the rear
derailleur ©Shimano
A
B
Fig. 86 Right-hand gear
lever ©Shimano
9. Shift to the individual gears and check that there is no
noise in any gear position.
10. If any adjustment is necessary, switch back to Setting
mode and ne-tune the rear derailleur.
Setting the front derailleur
1. Shift the derailleur to the largest sprocket.
2. Push the button on the display module until the LED
lights up to switch from Gearshift mode to Setting
mode.
3. Press buttons A or B on the right-hand gear lever.
Set the distance between the chain and the front
derailleur to between 0 and 0.5 mm.
4. Move the front derailleur and the rear derailleur to all
gear positions. Ensure that the chain guide does not
touch the chain.
5. Push the button on the display module until the red
LED goes out to switch the rear derailleur from Setting
mode to Gearshift mode.
Upper
adjustment screw
Lower
adjustment
screw
Fig. 89 Adjustment screws @Shimano
24.3.3.3 Sram Eagle AXS electronic
derailleur
Setting the front derailleur
1. Shift the chain to the second largest sprocket. Align
the pulley with the middle of the second largest
sprocket by adjusting the rear derailleur.
2. Hold the AXS button of the control unit in the pressed
position while pushing the rocker switch. Push the
rocker switch downward to adjust the rear derailleur
inward, and push the rocker switch upward to adjust
the rear derailleur outward.
Fig. 90 Adjusting the rear derailleur ©Sram
AXS button
3. Shift the rear derailleur inward to the largest sprocket.
4. Set the lower stop screw (L) so that it lightly touches
the stop of the outer parallelogram body, then turn the
screw back 1/4 turn.
5. Shift the rear derailleur outward to the smallest
sprocket.
6. Set the upper stop screw (H) so that it lightly touches
the stop of the inner parallelogram body, then turn the
screw back 1/4 turn.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff 2021 in the language / languages: English as an attachment in your email.

The manual is 5.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff 2021

Kalkhoff 2021 User Manual - German - 72 pages

Kalkhoff 2021 User Manual - Dutch - 71 pages

Kalkhoff 2021 User Manual - French - 74 pages

Kalkhoff 2021 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info