778421
43
Zoom out
Zoom in
Previous page
1/70
Next page
Originalbetriebsanleitung Allgemein EN-43
24.3.2.5 Sram AXS: charging station and
USB cable
Fig. 80 Charging station and battery ©Sram
Charging the battery: To charge the shifter battery, proceed
as follows:
1. Connect the Micro USB plug to the Micro USB socket of
the charging station.
2. Connect the USB plug to the USB port of a computer.
3. Remove the battery cover from the battery. Keep the
battery cover for later use.
4. Insert the battery into the charging station. It can take
up to 5 seconds until the LED on the charging station
lights up. It will take approximately one hour for the
battery to charge completely.
Notice
If none of the LEDs light after 5 seconds, make sure
that the plug is completely inserted into the charge
socket, and that you are using a standard USB charging
connector (1 A and 5 V). If the LEDs still do not light
up, get in touch with your specialist workshop.
5. Push the button on the charging station to release the
battery.
6. Insert the completely charged battery into the rear/
front derailleur and close the battery holder. If the
battery is properly inserted, the latch will click into
place.
Fig. 81 Inserting the battery ©Sram
CHARGE indicator: A continuously lit blue LED indicates
that the charger is receiving sucient power. A ashing
blue LED indicates that the charger is not receiving optimal
amounts of power. The battery will still charge, but the
charging process will take longer. A yellow LED indicates
that the battery is charging. A green LED indicates that the
charging process is complete.
ERROR display: A red LED indicates that an error has
occurred. Proceed as follows:
Remove the battery from the charging station and
reinsert it, and remove and reinsert the charging plug.
If the LED still lights up red, the battery or charging
station may be faulty. Get in touch with your specialist
workshop.
24.3.3 Adjusting the rear and front derailleurs
24.3.3.1 Mechanical derailleur
If the chain rattles and no longer runs smoothly, it makes
sense to adjust the rear and front derailleurs. We will show
you how to do that below. Get in touch with your dealer if
you are unsure about any of these tasks.
Rear derailleur: setting the upper stop
7. Shift the chain to the smallest chainring and the
smallest sprocket using the control elements on the
handlebars.
8. The idler pulley must now be positioned exactly
beneath the smallest cog. The chain should therefore
be in a straight line. If this isn’t the case, its position
must be adjusted using the adjustment screw.
9. Turn the cable
adjustment screw
clockwise if the rear
derailleur needs to be
moved inward, or
anticlockwise if it
needs to be moved
outward. Count the
turns, so that you can
reverse this action if
you have turned the
wrong screw and the
rear derailleur has not
moved.
10. To check whether the
tensile stress is set
correctly, shift a couple
of gears up and down
again using the control element. The pedal crank must
be moving when you do this.
Fig. 82 Turning the upper
adjustment screw ©Shimano
Adjustment screw
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff 2021 in the language / languages: English as an attachment in your email.

The manual is 5.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff 2021

Kalkhoff 2021 User Manual - German - 72 pages

Kalkhoff 2021 User Manual - Dutch - 71 pages

Kalkhoff 2021 User Manual - French - 74 pages

Kalkhoff 2021 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info