778421
28
Zoom out
Zoom in
Previous page
1/70
Next page
EN-28 Originalbetriebsanleitung Allgemein
5. Ensure that the newly-tightened saddle does not tip;
test it by pressing down on the front and back alter-
nately. After approximately 50 km, tighten the saddle
clamping screw again 13. Tightening torques for
threaded connections Page EN-19.
18.4 Cleaning and care
Plastic saddles can be cleaned quickly and easily using a
slightly damp cloth. You should treat leather saddles with a
special grease approximately every 12 months. Protect the
leather seat from rain with a cover and prevent extended
exposure to sunlight. Please also follow the saddle
manufacturer’s operating instructions 5. Component
guides Page EN-10.
19. Adjusting the handlebars and front
stems
Warning
Serious falls due to incorrect adjustments.
We recommend leaving all assembly and adjustment
work to a specialist workshop. If you want to screw
something on by yourself, be sure to observe
13. Tightening torques for threaded connections
Page EN-19
Front stems connect the handlebars of the bicycle to the
fork. They can be rigid, but they can also be angle- and
height-adjustable. Straight front stems clamp into the fork
steerer, while Ahead front stems are positioned together
with spacers on the fork steerer. Depending on the front
stem that is installed, you can adjust the position, angle
and height of the handlebars.
Fig. 27 Angle-adjustable straight
front stem
Fig. 26 Straight front stem
adjustable
Fig. 29 Angle-adjustable Ahead
front stem
Fig. 28 Ahead front stem
adjustable
Spacer Spacer
19.1 Adjusting the position of the handlebars
Your arms should be slightly bent when cycling in order not
to overstretch your wrists when holding the handlebars.
Make adjustments as required if you notice after a while
that the position of the handlebars does not suit your
riding style.
Warning
Impaired function due to damaged and/or clamped
cables.
If control elements, brake and gear levers are not
adjusted to the new handlebar position, rotating
the handlebars can cause damage to cables that are
routed through the inside of the front stem.
You can adjust the position of the handlebar by turning the
handlebars. The procedure is almost identical for all front
stem systems:
1. Loosen the screws on the front/top of the front stem by
turning these counterclockwise with an Allen key.
Screws
Fig. 30 Possible screw arrangement
2. Turn the handlebars until these reach a position that
you nd comfortable. Ensure that the handlebars are
clamped exactly centrally in the front stem.
3. Now, tighten the screws again clockwise alternately
and crosswise using a torque wrench 13. Tightening
torques for threaded connections Page EN-19. Once you
have adjusted the position of the handlebar, you will
need to adjust the control elements, brake and gear
levers as required 23.4 Brake lever(s) Page EN-34,
24.1 Adjusting the position of the control elements
Page EN-37.
19.2 Adjusting the angle of the handlebars
On angle-adjustable front stems, the angle of the
handlebars can be adjusted using a screw in the front stem.
The value of the selected angle is often indicated on the
component. When adjusting the angle of the handlebars,
you should also ensure that holding the handlebars does
not overstretch your wrists.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff 2021 in the language / languages: English as an attachment in your email.

The manual is 5.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff 2021

Kalkhoff 2021 User Manual - German - 72 pages

Kalkhoff 2021 User Manual - Dutch - 71 pages

Kalkhoff 2021 User Manual - French - 74 pages

Kalkhoff 2021 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info