778421
27
Zoom out
Zoom in
Previous page
1/70
Next page
Originalbetriebsanleitung Allgemein EN-27
3. Tighten the front and rear clamping screws clockwise
to the specied torque using a torque wrench 13.
Tightening torques for threaded connections Page EN-19.
Use approximately the same tightening torque for both
screws.
4. Tilting the saddle: Most riders prefer a horizontal
saddle. If you prefer the saddle to be slightly inclined,
however, loosen both clamping screws alternately by
turning these counterclockwise. Turn the clamping
screws completely two to three times at most,
otherwise the whole mechanism could fall apart. The
angle of the saddle will change as soon as you turn the
clamping screws.
5. Tighten both clamping screws equally clockwise so
that the saddle stays at the same angle.
6. Now, use a torque wrench to tighten the screws to the
specied torque 13. Tightening torques for threaded
connections Page EN-19.
7. Ensure that the newly-tightened saddle does not
tip; test it by pressing down on the front and back
alternately. After approximately 50 km, tighten the
saddle clamping screws again 13. Tightening torques
for threaded connections Page EN-19.
18.2 Dual-screw seat post I: adjusting the
seating position
STOP STOP
STOP STOP
Seat post
Seat stay
Fig. 24a Setting the seating position
Clamping screws
STOP STOP
STOP STOP
Clamping screws Seat post
Seat stay
Fig. 24b Setting the seating position
1. Movingthesaddle: Loosen the rear clamping screw by
turning it anticlockwise. Turn the rear clamping screw
completely two to three times at most, otherwise the
whole mechanism could fall apart.
2. Move the saddle horizontally. Stay within the marking
and ensure (e.g., using a spirit level) that the saddle
is horizontal.
18.3 Dual-screw seat post II: adjusting the
seating position
STOP STOP
STOP STOP
Clamping screw Seat post
Adjustment screw
Fig. 25 Setting the seating position
1. Movingthesaddle:Loosen the clamping screw by
turning it anticlockwise. Turn the screw completely
two to three times at most or the whole mechanism
could fall apart.
2. Move the saddle horizontally. Stay within the marking
and ensure (e.g., using a spirit level) that the saddle
is horizontal.
3. Secure the clamping screw by tightening it clockwise
to the specied torque using a torque wrench 13.
Tightening torques for threaded connections Page EN-19.
Ensure that the clamping screw is straight and comple-
tely screwed into the nut.
4. Tilting the saddle: Most riders prefer a horizontal
saddle. If you prefer the saddle to be slightly inclined,
however, turn the adjustment screw clockwise slightly
to move the saddle nose downward. To move the
saddle nose upward, turn it counterclockwise slightly.
The adjustment screw must be screwed in to a depth of
at least 9 mm.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff 2021 in the language / languages: English as an attachment in your email.

The manual is 5.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kalkhoff 2021

Kalkhoff 2021 User Manual - German - 72 pages

Kalkhoff 2021 User Manual - Dutch - 71 pages

Kalkhoff 2021 User Manual - French - 74 pages

Kalkhoff 2021 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info