Manual JVC SR-L910E (page 22 of 28) (English)

45656

Zoom out

Zoom in

1/28

VTR MODE

(SHARPNESS) NORMAL

(VIDEO MODE) AUTO

(AUTO REC) OFF

(REC CHECK) MANUAL

(TAPE END MODE) STOP

(INDEX SEARCH) ON

(INDEX AL/SKIP) ALARM

(TAPE END BUZZER) OFF

(WARNING BUZZER) OFF

PRESS (SHIFT, SET)

PRESS (MENU) TO END

PAL

8-4 Index Search

Searching the index code (VISS signal) recorded at the

start of alarm recording helps you quickly locate alarm

recordings (index search function).

• To use the index search function, set the function menu

switch [INDEX SEARCH] to ON.

When reverse shuttle search or fast-forward shuttle

search is executed, the Index Search mode is engaged.

When an index code is located, playback starts

automatically.

When the function menu switch [NOISELESS PLAY] is

set to OFF, playback takes place in the 3H mode

regardless of the set playback mode. When set to ON,

playback takes place in the playback mode set with the

TIME MODE button.

To engage the Reverse Shuttle Search mode or the

Fast-Forward Shuttle Search mode, press the

[REW] or [FF] button once during playback.

When an index code is searched in the Fast-Forward

mode or the Rewind mode, the Stop mode is

automatically engaged when the code is located.

• The VISS indicator is shown on the display whenever

the Index Search mode is engaged.

Index Search does not function in the Auto Rewind

mode.

When the picture moves up and down in the

Still mode

Press the [V. LOCK +/-] button to minimize vertical jitter.

When noise appears in the picture in the Play/

Field Advance Play/Search mode

Tracking can only be adjusted in the following modes:

• VHS Standard (3H) Play, Long Play (LP), 12H and

24H mode

• Field Advance Playback with the [PAUSE/STILL]

button

• Search mode

Ⅲ

Press the [TRACKING +/-] button to reduce noise.

To restore the tracking preset mode, press the + and -

buttons simultaneously.

* Tracking adjustment cannot be performed in the

L12H/L24H Timelapse Play modes.

8-5 Tracking/V. Lock Adjustment

[TRACKING +/-] button

[V. LOCK +/-] button

8 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK

VTR mode 1 setting screen

Set to

INDEX

VTR MODE 1

(SHARPNESS) NORMAL

(VIDEO MODE) AUTO

(AUTO REC) OFF

(REC CHECK) MANUAL

(TAPE END MODE) REPEAT

(INDEX SEARCH) OFF

(INDEX AL/SKIP) ALARM

(TAPE END BUZZER) OFF

(WARNING BUZZER) ON

PRESS (SHIFT, SET)

PRESS (MENU) TO END

9 TROUBLESHOOTING

9-1 Error Indication

Error indications are shown on the display whenever there

are problems with cassette loading, unloading or

mechanism operation.

When a problem occurs, the error indication E-

– –

blinks.

When any one of the error indications is shown, a 12 V

warning signal is output from the rear panel's WARNING

OUT connector (for E-01 to E07, and E-11 during

recording) (only when the <TERMINAL SEL 2> menu

function switch is set to "WARN").

When the function menu switch <WARNING BUZZER>

is set to ON, the buzzer sounds whenever a problem

occurs (for E-01 to E07, and E-11 during recording).

When an error indication appears or the buzzer

sounds, turn the operating mode off and then on again

to clear the error indication and buzzer sound.

When the error indication E-

– –

is shown, turning the

operating mode on again may not clear the problem. In

this case, consult your local JVC dealer (for E-01 to E-

07).

Contents

Problem with loading operation

Problem with unloading operation

Problem with supply reel rotation

Problem with drum rotation

Problem with take-up reel rotation

Problem with capstan rotation

Problem with eject operation

Error with recording check

(inferior recording performance)

Insufficient capacity of the built-in

battery for backup (Displayed

only in the operating off mode.)

No video signals input to the

[VIDEO IN] connector

Error

indication

E-01

E-02

E-03

E-04

E-05

E-06

E-07

E-09

E-10

E-11

VCR operation

The operating mode is turned off.

Cleans the heads with the VCR's

head cleaner.

—

Measures

Turn the operating mode on again.

Cleans the heads with the head

cleaning tape, then check the

recording picture quality again. The

tape may be defective. Replace the

tape and check again.

If the picture quality is still inferior,

consult your local JVC dealer.

TIME MODE

Display section

Error indication

This unit uses a microprocessor and may not function properly if there is external noise or interference. In this case, turn

the operating mode off and unplug the power cord from the AC outlet. Then plug the power cord in again and check

operation.

Contact your local JVC dealer to

replace the built-in battery.

Input video signals.

Buzzer sound

VTR mode 1 setting screen

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JVC SR-L910E in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JVC SR-L910E Manual

Product: