136123
75
Zoom out
Zoom in
Previous page
1/84
Next page
75
Before requesting service for a problem, use this chart to see if you can correct the trouble yourself. Small problems are often easily
corrected, and this can save you the trouble of sending your video recorder off for repair.
Troubleshooting
POSSIBLE CAUSE
The mains power cord is discon-
nected.
"" is displayed on the display panel
with Auto Timer set to "OFF".
The batteries are discharged.
SYMPTOM
1. No power is applied to the
recorder.
2. The clock is functioning properly,
but the recorder cannot be powered.
3. The remote control won't function.
CORRECTIVE ACTION
Connect the mains power cord.
Press the button to turn the ""
indicator off.
Replace the dead batteries with new
ones.
SYMPTOM
1. The tape does not run during
recording.
2. The tape will not rewind or fast-
forward.
CORRECTIVE ACTION
Press PLAY to turn the " " indicator
off.
Check the cassette.
SYMPTOM
1. The playback picture does not
appear while the tape is running.
2. Noise appears during visual search.
3. Noise appears during normal
playback (VHS deck).
4. The playback picture is blurred or
interrupted while TV broadcasts are
clear or "USE CLEANING
CASSETTE" message appears on the
screen.
5. Breaks are noticeable in Hi-Fi
soundtrack (VHS deck).
POSSIBLE CAUSE
The TV receiver is not set to the AV
mode.
This is normal.
The automatic tracking mode is
engaged.
The video heads may be dirty.
Automatic tracking is engaged.
CORRECTIVE ACTION
Set the TV to its AV mode.
Try manual tracking. ( pg. 30)
Use a JVC dry cleaning cassette
(TCL-2U for the VHS deck/
M-DV12CLAU for the DV deck) or
consult your JVC dealer.
Engage and adjust tracking manually.
( pg. 30)
POSSIBLE CAUSE
" " is displayed on the display
panel.
The tape is already fully rewound or
fast-forwarded.
POWER
PLAYBACK
TAPE TRANSPORT
CORRECTIVE ACTION
Insert a cassette, or using adhesive
tape, reseal the slot where the tab was
removed.
Insert a cassette, or set the erase
protection switch to "REC".
Set to the desired channel.
Confirm that the source is properly
connected.
Confirm that all units’ power switches are
turned on.
Set the input mode to "L-1", "L-2" or "F-1".
POSSIBLE CAUSE
VHS deck
There is no cassette loaded, or the
cassette loaded has had its Record
Safety tab removed.
DV deck
There is no cassette loaded, or the
cassette loaded has had its erase
protection switch set to "SAVE".
"L-1", "L-2", "F-1" or "SAT" has been
selected as the input mode.
The source (another video recorder,
camcorder) has not been properly
connected.
All necessary power switches have
not been turned on.
The input mode is not correct.
SYMPTOM
1. Recording cannot be started.
2. TV broadcasts cannot be recorded.
3. Tape-to-tape editing is not possible.
RECORDING
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JVC hr dvs 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JVC hr dvs 2 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info