574986
9
Zoom out
Zoom in
Previous page
1/17
Next page
1716
6. Reception indicator
The reception indicator shows whether the watch has been synchroni-
sed with the signals from the transmitter stations.
Make sure that one of the five time display modes is shown in the
display and if this is not the case, press T3 until one of the time
display modes is shown.
Press T4 until the reception indicator is shown (time display mode 5:
time, transmitter indicator and reception indicator).
If the reception indicator reads 0 then the watch was properly synchro-
nised during the previous night. The numbers 1-9 show the number of
days in which watch has not been automatically synchronised due to
poor reception. The indicator returns to 0 the next time the signal is
successfully received.
7. Manual synchronisation (transmitter call)
The watch can also be manually synchronised
in any of the time display modes i.e. you can
call the transmitter station. This is done by
pressing T1 for more than 3 seconds. The
display changes to show the reception indi-
cator (time display mode 5).
T1T4
T5
T2T3
> 3 sec.
Your Mega 1000 provides you with the option of setting the alarm as a
daily repeating alarm (24h alarm) or as a single alarm.
Proceed as follows to set the type of alarm:
Make sure that your Mega 1000 is in ALARM
mode. If this is shown in the display, press
button T1 (set+) and T2 (set-) at the same
time to start adjusting the alarm mode. Now
press the T1 (set+) or T2 (set-) button, to
select the desired alarm mode. The selected
alarm mode is displayed in the upper section
of the display, SET AL 24 for the daily repea-
ting alarm and SET AL – for the one-off sin-
gle alarm.
After you have selected the desired alarm mode, press the T4 button
to return to setting the alarm time.
The alarm can be switched off by pressing any button.
Preferably the T5 button should be used for this in order to avoid acci-
dentally altering the settings.
After the alarm has sounded it is no longer active and the ”ON” tag
disappears. If you want the alarm to sound again, set the desired time
as described above and reactivate the alarm.
T1T4
T5
T2T3
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Junghans MEGA 1000 - W 604.62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Junghans MEGA 1000 - W 604.62 in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info