2928 29
13. Illumination
Your Junghans Mega 1000 is equipped with a display light. Press T5
to activate the light, which stays on for 4 seconds. After 4 seconds the
light goes out in order to save battery power and reduce energy wasta-
ge when the light is activated accidentally.
The light can then be reactivated by pres-
sing T5 again.
28
When the watch is in manual start mode the settings that need to be
adjusted (hour, minute, second, 12-24 hour display, language, date
display mode, year, month and day) flash one after the other in the
display.
When the hour is flashing it can be set to the
correct value using T1 (set+) and T2 (set–).
After setting the hour press T4 to set the
minutes using T1 (set+) and T2 (set–). Press
T4 again to select the seconds indicator, and
then press T1 or T2 to reset the second
counter to zero.
The watch must be synchronised manually with another time source
(watch, clock etc.) Press T4 to move from one setting to the next.
Proceed to set the value in the same manner as before. Once you
have correctly adjusted all settings press T4 to confirm and the
display will change back to time display mode.
