614762
38
Zoom out
Zoom in
Previous page
1/70
Next page
37
Threading, Chainstitch and OL /Nawlekanie, ścieg łańcuszkowy i owerlok
Einfädeln, Kettenstich und OL / Enfilage, point de chaînette et surjet
1.Threading chainstitch looper (purple)
Place the spool on the spool holder pin as illustrated.
(1,2) Bring the thread up from the spool and lay it from the front to the back into
the guide.
(3,4) Thread the guides.
(5) Thread the tension dial.
(6,7,8) Thread the guides.
(9) Place the thread horizontally in the guide.
(10,11) Thread the guides.
Bring the needles into the lowest position. Turn handwheel.
(12) Push the chain looper auto-threader (white) up towards the chainlooper and
press them down together.
(13) Thread the looper thread guide back to front.
(14) Thread the looper eye front to back and cut thread to about 10cm (4").
(15) Push the chain looper back up to sewing position.
Raise the needle to highest position (turn handwheel)
Note: If the chain looper has to be re-threaded, cut the needle thread above the
needle eye and remove. Thread the looper first and then the needle.
1. Kettenstich Greifer einfädeln (violett)
Fadenspule anleitungsgess auf den Spulenhalterstift stecken.
(1,2) Faden aufnehmen und von vorne nach hinten in die hrungen legen.
(3,4) hrungen hinten an der Maschine und im Stoffauflagedeckel eindeln.
(5) Fadenspannung einfädeln.
(6,7,8) Führungen einfädeln.
(9) Faden horizontal in der Führung platzieren.
(10,11) hrung einfädeln.
Nadeln in Tiefststellung bringen, Handrad im Gegenuhrzeigersinn drehen.
(12) Die Untergreifereinfädelautomatik (weiss) nach oben zum Greifer drücken und
beide zusammen nach unten ziehen.
(13) Erstes Greiferöhr von hinten nach vorne einfädeln.
(14) Greifehr von vorne nach hinten einfädeln, Faden auf 10cm (4) zurückschneiden.
(15) Ketten-Greifer in hstellung zurückdcken.
Nadeln in Höchststellung bringen, Handrad im Gegenuhrzeigersinn drehen.
Hinweis: Wenn der Greifer neu eingefädelt werden muss, Nadelden beim Öhr
abschneiden, zuerst Greiferöhr, dann Nadelöhre einfädeln.
1. Enfiler le boucleur pour le point de chaînette (violet)
Enficher la bobine sur la broche conforment aux instructions.
(1,2) Prendre le fil et le faire passer dans les guides, de l’avant vers l’arrière.
(3,4) Enfiler les guides.
(5) Enfiler la tension de fil.
(6,7,8) Enfiler les guides.
(9) Placer le fil horizontalement dans le guide.
(10) Enfiler le guide.
(11) Enfiler le guide.
(12) Presser lenfilage automatique du boucleur inférieur (blanc) vers le haut en direc-
tion du boucleur, puis tirer les deux ensemble vers le bas.
(13) Enfiler le premier chas du boucleur, de l’arrre vers l’avant.
(14) Enfiler le chas du boucleur, de l’avant vers l’arrre, raccourcir le fil excédent à 10
cm (4).
(15) Ramener le boucleur dans la position de couture en le pressant.
Amener les aiguilles dans leur position la plus haute (tourner le volant) .
Indication: si le boucleur doit être renfi, commencer par couper les fils d’aiguille
au ras du chas. Enfiler d’abord le boucleur, ensuite les aiguilles.
1. Nawlekanie sczepiarki łańcuchowej (fioletowy)
Umieść szpulkę na bolcu uchwytu szpulki jak na rysunku.
(1,2) Unieś nić ze szpulki i włóż ją od przodu do tyłu do prowadnicy.
(3,4) Nawlecz prowadnice.
(5) Nawlecz tarczę wyboru naprężenia.
(6,7,8) Nawlecz prowadnice.
(9) Umieść nić poziomo w prowadnicy.
(10,11) Nawlecz prowadnice. Sprowadź igły do najniższej pozycji. Obróć
pokrętło.
(12) Popchnij automatyczną nawlekarkę sczepiarki łańcuchowej do góry
w stronę sczepiarki łańcuchowej i wciśnij je razem w dół.
(13) Nawlecz prowadnicę nici sczepiarki od tyłu do przodu.
(14) Nawlecz oczko sczepiarki od przodu do tyłu i obetnij nić do około
10 cm.
(15) Popchnij sczepiarkę łańcuchową z powrotem w górę do pozycji do szycia.
Unieś igłę do najwyższej pozycji, obracając pokrętło.
Uwaga: Jeśli sczepiarka łańcuchowa wymaga przewleczenia, obetnij nić od
igły ponad oczkiem igły i usuń. Najpierw nawlecz sczepiarkę, a następnie
igłę.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-735 in the language / languages: German, Polish as an attachment in your email.

The manual is 19,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki MO-735

Juki MO-735 User Manual - English, French, Italian, Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info