614762
17
Zoom out
Zoom in
Previous page
1/72
Next page
16
Needle and thread / Aguja e hilo
Aiguille et fil / Ago e filo
Needles
Needles must be in perfect condition. Problems can occur if needles:
A are bent.
B are damaged or blunt.
C have hooked points.
Agujas
Las agujas deben estar impecables. Aparecen dificultades en los siguientes casos:
A Aguja torcida
B Aguja despuntada, estropeada
C punta de aguja con barbas
Aiguille
Les aiguilles doivent être en bon état. Des difficultés apparaîtront dans les cas suivants:
A Aiguille tordue.
B Aiguille émoussée ou endommagée.
C Pointe de l’aiguille avec des bardes.
Ago
L’ago deve essere sempre perfetto. I problemi sono causati da:
A Ago storto
B Ago spuntato, danneggiato
C Punta danneggiata
A
B
C
Needle and thread
The needle size used depends on the thread. The needles should be in accordance with
thread used. When sewing, the thread is fed through the long groove in the needle. If the
needle is too fine, the thread does not fit into the groove and stitches will be skipped.
Use needles No. 70 - 90.
* It is recommended to use JLx2 needle, especially when sewing thick materials, over-
lapped section, etc, with overlock machine.
Aguja e hilo
El grosor se la aguja depende del hilo escogido, es decir la aguja tiene que ser adecuada
para el hilo. Durante la costura, el hilo entra en la ranura delantera de la aguja. Si la aguja
es demasiado fina el hilo no cabe en la ranura y salen puntos defectuosos. Utilizar
agujas No. 70 - 90.
* Se recomienda usar aguja JLx2, especialmente para coser materiales pesados,
secciones superpuestas, etc. con máquina sobreorilladora.
Aiguille et fil
La grosseur de l’aiguille dépend du fil choisi. L’aiguille doit concorder avec le fil. Lorsque
l’on pique, le fil se place dans la longue rainure de l’aiguille. Si cette dernière est trop fine,
le fil ne peut entrer dans la rainure, ce qui empêche les points de se former correctement.
Employer des aiguilles no. 70 - 90.
* Il est recommandé d’utiliser l’aiguille JLx2, tout particulièrement lors de la couture de
tissus épais, de parties se chevauchant, etc., avec une surjeteuse.
Ago e filo
Lo spessore dell’ago dipende sempre dalla scelta del filo e l’ago deve essere adatto al
filo. Il filo passa durante la cucitura nella lunga scanalatura sul davanti dell’ago. Se l’ago
è troppo sottile, il filo non trova abbastanza spazio nella scanalatura ed il risultato sono
punti saltati o difettosi. Usare sempre aghi n.70-90.
* E’ raccomandato l’uso dell’ago JLx2, specialmente per cucire materiale pesante tessuti
sovrapposti,ecc,per macchine tagliacuci.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-735 in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki MO-735

Juki MO-735 User Manual - German, Polish - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info