614762
16
Zoom out
Zoom in
Previous page
1/72
Next page
15
Inserting the needles
Needles can be inserted quickly and easily with the practical needle inserter (A).
Switch the machine off ( Power switch to “O”)
Disconnect machine from electricity supply.
Turn handwheel towards you until needles are fully raised. Match the matching up
marks on handwheel and side cover.
Lower the presser foot.
Using the small screwdriver, loosen the needle setscrews and remove the needles (B).
Place the right-hand needle, flat side towards the back, into the hole of the needle
inserter and insert the needle as far as possible into the needle clamp. Tighten the
setscrew lightly and then insert the left-hand needle in the same way and tighten both
setscrews (C).
Colocar agujas
Con el coloca-agujas en el mango del pincel se pueden colocar las agujas fácil y
rápidamente (A).
Desconectar la máquina, interruptor principal a „O“.
Girar el volante hacia adelante hasta que las agujas estén en su posición más alta.
Marcas en el volante y tapa lateral están lado a lado.
Bajar el prensatelas.
Aflojar los tornillos de sujeción con el destornillador pequeño. Sacar las agujas (B).
Según el punto escogido, colocar la aguja derecha o izquierda.
Colocar la aguja, con la parte plana mirando hacia atrás, en el agujero del pincel e
introducir las agujas en el sujeta-agujas, hasta llegar al tope.
Apretar los tornillos de sujeción (C).
Mettre les aiguilles en place
Le guide d’aiguille situé dans le manchon du pinceau permet la mise en place facile et
rapide des aiguilles (A).
Couper le circuit de la machine en mettant le commutateur principal sur „O“.
Tourner le volant en avant et amener les aiguilles à leur position la plus élevée. Placer,
côte à côte, les flèches de repère du volant et du capot latéral.
Abaisser le pied-de-biche.
Desserrer la vis de fixation de l’aiguille avec le petit tournevis. Enlever les aiguilles (B).
Selon le point choisi, introduire l’aiguille à droite ou à gauche.
Placer les aiguilles avec le côté plat à l’arrière dans le guide situé sur le manchon du
pinceau, puis introduire les aiguilles dans le porte-aiguille jusqu’à ce qu’elles butent en
haut. Resserrer les vis de fixation des aiguilles (C).
Sostituzione degli aghi
Il piccolo foro del pennello regge l’ago e facilita la sostituzione (A):
Spegnere la macchina, l’interruttore principale su “O”.
Portare gli aghi alla loro massima altezza girando il volantino in avanti. La freccia del
volantino e quella del coperchio laterale combaciano.
Abbassare il piedino.
Svitare le viti degli aghi con il cacciavite piccolo. Togliere gli aghi (B). Inserire l’ago destro
o sinistro, secondo la selezione del punto.
Inserire l’ago nuovo nel foro del pennellino.
Poi introdurre l’ago con la parte piatta rivolta indietro nel morsetto degli aghi, spingendolo
bene in alto fino al suo arresto. Stringere le viti di fissaggio (C):
A
C
B
Using the machine
Puesta en servicio / enhebrado
Mise en service / enfilage
Uso della macchina / infilatura
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-735 in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 5,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki MO-735

Juki MO-735 User Manual - German, Polish - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info