707752
37
Zoom out
Zoom in
Previous page
1/46
Next page
Mantenimiento Manutenção
Las cuchillas están hechas de
material especial y son muy
duraderas.
Pueden sustituirse si quedan romas
o se deterioran.
As dacas são feitas de material
especial e são muito duradouras.
Podem ser substituídas quabdo
as lâminas se tornam rombas ou
ficam danificadas.
- Desconecte la máquina de la
alimentación de la red y ponga
el interruptor principal en la
posición”O”.
- Afloje el tornillo de ajuste de la
tapa de la bombilla (A) y retire
dicha tapa.
- Desenrosque la bombilla y
sustitúyala por otra nueva
- Vuelva a colocar la tapa de la
bombilla y reapriete el tornillo
de ajuste.
- Desligue a máquina (”0”) e
depois desligue-a da corrente
eléctrica, retirando a ficha.
- Desaperte o parafuso (A) da
tampa da lâmpada e retire a
tampa.
- Desaparafuse a lâmpada e
substitua-a por uma nova.
- Ponha a tampa da lâmpada
e volte a apertar o parafuso.
Nota:
Utilize sempre lâmpadas 230V
15W. As lâmpadas estão
disponíveis no seu agente
local.
– Desconecte la máquina de la
alimentación de la red y ponga
el interruptor principal en la
posición “O”.
Durante la costura y el corte, una
cantidad importante de polvo,
hilachas, resto de hilo o de tela se
acumula en la máquina. Pro ello
, hay que eliminar periódicamente
estos depóstios.
Su máquina de coser overlock
requiere muy poco engrase, pero
si se utiliza con frecuencia, deberá
engrasar los puntos ilustrados (B)
con unas gotas de aceite.
– Desligue a máquina da corrente
eléctrica.
Enquanto se costura, acumulam-
se poeiras e cotão na máquina.
Devem ser retirados regularmente.
O chuleador não requer muita
lubrificação mas quando é
urilizado com frequeência,
lubrifique os pontos ilustrados
(B) com uma gota de óleo.
Indicación:
Utilice siempre bombillas de
110V/ 230V/ 240V y 15W. Las
bombillas están siempre
disponibles a través de su
distribuidor local.
Cuchillas Facas
Cambio de la bombilla Substituir a lâmpada
Limpieza y engrase
Limpeza e lubrificação
Les couteaux
Les couteaux sont réalisés en
métal dur, résistant à toute
épreuve. S'il arrivait malgré tout
que la lame soit détériorée.
Entretien
Remplacer l'ampoule
- Débrancher la machine du réseau
et placer l'interrupteur principal
sur "O".
- Desserrer la vis (A) du capot de
l'ampoule, puis retirer le capot de
l'ampoule.
- Dévisser l'ampoule, puis la
remplacer par une nouvelle.
- Remettre le capot de l'ampoule,
puis resserrer la vis.
Indication:
N'employer que des ampoules de
230 V / 15W. Ces ampoules sont
disponibles auprès de votre
revendeur local.
Nettoyage et huilage
- Débrancher la machine du
réseau et placer l'interrupteur
principal sur "O".
Pendant la couture et la coupe,
une quantité importante de
poussière, de bourre, de fil ou de
tissu s'accumule dans la machine.
Eliminer régulièrement ces dépôts.
Lors d'utilisations fréquentes de la
machine, huiler les points (B)
indiqués sur le schéma en
prévoyant seulement quelques
gouttes.
36
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-50e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-50e in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info