707752
38
Zoom out
Zoom in
Previous page
1/46
Next page
Needles break
Skipped stitches
Poor stitch formation
Seams flute or ware (knits)
Seams pucker
Fabric edges curl
Thread loops are loose
Machine does not sew
Thread tension is too tight
for thread used.
The machine is not threaded
correctly.
Needles are incorrectly
inserted.
Needles are bent, blunt or the
points are damaged.
Needles not inserted
correctly.
Fabric was pulled while sewing.
Needles are bent or blunt.
Wrong needles used.
Thread is not wound correctly
round tension dials.
Differential feed is set incorrectly.
Fabric was pulled while sewing.
Differential feed is set incorrectly.
Too much fabric in the stitch
formation.
Too little fabric in the stitch
formation.
Cord not plugged in correctly.
Main switch not on.
Thread breaks
Reduce thread tension.
Check the threading.
Insert needles fully into needle
clamp with flat side to the back.
Replace the needles.
Insert needles fully into
needle clamp with flat side
to the back.
Guide fabric gently with both
hands.
Replace the needles.
Use system HAx1 (130/705H) needles.
Check threading.
Adjust differential feed
between N and 8 " "
Adjust differential feed
between N and 5 " "
Reduce cutting width, knife
to the left.
Increase the cutting width,
knife to the right.
Check plug.
Switch machine on"1".
Trouble shooting guide
37
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-50e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-50e in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info