614738
17
Zoom out
Zoom in
Previous page
1/72
Next page
15
Thread the bobbin
thread guide.
Put the thread with both
hands around the thread
guide so that it winds clock-
wise.
Enfilez le fil per le guide.
Insérez le fil avec les deux
mains sous le ressort du
guide pour qu’il se déroule
dans le sens d’une montre.
Enhebrar el guía-hilo de
la canilla.
Coloque el hilo manualmente
alrededor del guía-hilo de
forma que se enrolle en la
dirección de las agujas del
reloj.
Infilatura guida filo
bobina.
Passare il filo con entrambe
le dita, attorno al guida filo
in modo che giri in senso
orario.
Thread spool cap (Small)
Petite bobine
Tapa de la bobina (pequeña)
Fermo per rocchetto piccola
Small spool
Petite coiffe
Bobina de hilo
Rocchetto filato piccolo
Thread spool cap (Large)
Grande bobine
Tapa de la bobina (grande)
Fermo per rocchetto grande
Large spool
Grande coiffe
Bobina de hilo
Rocchetto filato grande
3
4
Set the bobbin on the
bobbin winder.
Press the bobbin against the
bobbin winding regulator.
Placez la canette sur
l’axe du dévidoir.
Poussez la canette contre
l’arrêt de canette.
Coloque la canilla en el
bobinador.
Apriete la canilla contra el
regulador del bobinador.
Posizionare la bobina
sull'avvogi bobina.
Spingere la bobina contro
l'avvolgi bobina.
Push the bobbin back to
the left.
Cut an excess thread and
take out the bobbin.
Poussez la canette vers
la gauche.
Coupez l’excédent de fil et
retirez la canette.
Empuje la canilla hacia
atrás y hacia la izquierda.
Corte el exceso de hilo y
saque la canilla.
Premere la bobina
indietro verso destra.
Tagliare il filo in eccesso e
togliere la bobina.
Start winding the bobbin.
Upon completion of winding
the bobbin, press the start/
stop button again.
Embobinez la canette.
Une fois la canette remplie,
arrêtez la machine.
Empiece a hacer canilla.
Tras haber completado la
canilla, apriete otra vez el
botón de marcha/paro.
Partenza avvolgimento
bobina.
A fine avvolgimento bobina
premere il tasto partenza/
stop.
Bobbin winding
regulator
Arrêt de canette
Regulador
del bobinador
Regolatore
avvolgi bobina
Bobbin
winder
Dévidoir
Bobinador
Avvolgi
bobina
5
6
7
Place the thread spool and cap onto the spool pin.
Select the spool cap that matches the circumference of
the thread spool to be used.
Placez la bobine de fil et la coiffe sur le porte-bobine.
Sélectionnez le type de coiffe de taille appropriée à la
bobine.
Coloque la bobina de hilo con su tapa en el pivote
del portaconos.
Escoja la tapa adecuada al diámetro de la bobina del
hilo.
Come posizionare il rocchetto del filo sul supporto.
Scegliere il fermo adatto al diametro del rocchetto del filo
da utilizzare
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki HZL-E61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki HZL-E61 in the language / languages: Italian as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki HZL-E61

Juki HZL-E61 User Manual - English, French, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info