614555
40
Zoom out
Zoom in
Previous page
1/51
Next page
– 38 –
Compensation of timing of the solenoid for reverse feed stitching (Function setting No. 51 to 53)
When the normal and reverse feed stitches are not uniform under the automatic reverse feed stitching
action, this function can change the ON / OFF timing of the solenoid for back tack and compensate the
timing.
Compensation of on-timing of solenoid for reverse feed stitching at the start of sewing (Function setting
No. 51)
On-timing of solenoid for reverse feed stitching at the start of sewing can be compensated by the unit
of angle.
n.
15
Adjusting range : – 36 to 36 <1 / 10˚>
Set value Compensation angle Number of stitches of compensation
– 36 – 360° – 1
– 18 – 180° – 0.5
0 0
18 180° 0.5
36 360° 1
Compensation of off-timing of solenoid for reverse feed stitching at the start of sewing (Function set-
ting No. 52)
Off-timing of solenoid for reverse feed stitching at the start of sewing can be compensated by the unit
of angle.
n.
25
Adjusting range : – 36 to 36 <1 / 10˚>
Set value Compensation angle Number of stitches of compensation
– 36 – 360° – 1
– 18 – 180° – 0.5
0 0
18 180° 0.5
36 360° 1
Compensation of off-timing of solenoid for reverse feed stitching at the end of sewing (Function setting
No. 53)
Off-timing of solenoid for reverse feed stitching at the start of sewing can be compensated by the unit
of angle.
n.
35
Adjusting range : – 36 to 36 <1 / 10˚>
Set value Compensation angle Number of stitches of compensation
– 36 – 360° – 1
– 18 – 180° – 0.5
0 0
18 180° 0.5
36 360° 1
* When the point
before 1 stitch is
regarded as 0˚,
compensation is
possible by 360˚ (1
stitch) in front and in
the rear.
– 360˚
– 180˚
180˚
360˚
360˚
180˚
– 180˚
– 360˚
360˚
180˚
– 180˚
– 360˚
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info