614555
38
Zoom out
Zoom in
Previous page
1/51
Next page
– 36 –
Needle up/down switch function changeover function (Function setting No. 22)
The needle up/down switch function can be changed over between the needle up/down compensation and
one stitch compensation.
n.
22
0 : Needle up / down compensating stitching
1 : One stitch compensating stitching
Setting of the suction time of the back-tack solenoid (Function setting No. 29)
This function can change the suction time of the back-tack solenoid. It is effective to decrease the value
when the heat is high.
(Caution) When the value is excessively decreased, failure of motion or defective pitch will follow.
Be careful when changing the value.
n.
92
Setting range : 50 to 500 ms <10 / ms>
Function of reverse feed stitching on the way (Function setting Nos. 30 to 33)
Functions of the limit of number of stitches and thread trimming command can be added to the touch back
switch on the sewing machine head.
Function setting No. 30 Function of reverse feed stitching on the way is selected.
n.
03
0 : OFF Normal back-tack function
1 : ON Function of reverse feed stitching on the way
Function setting No. 31 Number of stitches performing reverse feed stitching is set.
n.
13
Setting range : 0 to 19 stitches
Function setting No. 32 Effective condition of reverse feed stitching on the way
n.
23
0 : OFF Inoperative when the sewing machine stops. (Reverse feed stitching on the way
functions only when the sewing machine is running.)
1 : ON Operative when the sewing machine stops. (Reverse feed stitching on the way
functions both when the sewing machine is running and stops.)
(Caution) Either condition is operative when the sewing machine is running.
Function setting No. 33 Thread trimming is performed when reverse feed stitching on the way is com-
pleted.
n.
33
0 : OFF Without thread trimming
1 : ON Thread trimming is executed.
Application
Function setting
Output function
No.30 No.32 No.33
0 0 or 1 0 or 1 It works as normal touch-back switch.
1 0 0
When operating touch-back switch at the time of depressing front part of the pedal,
reverse feed stitching as many as the number of stitches specied by the function
setting No. 31 can be performed.
1 1 0
When operating touch-back switch at the time of either stop of the sewing machine
or depressing front part of the pedal, reverse feed stitching as many as the number
of stitches specied by the function setting No. 31 can be performed.
1 0 1
When operating touch-back switch at the time of depressing front part of the pedal,
automatic thread trimming is performed after reverse feed stitching as many as the
number of stitches specied by the function setting No. 31 has been performed.
1 1 1
When operating touch-back switch at the time of either stop of the sewing machine
or depressing front part of the pedal, automatic thread trimming is performed after
reverse feed stitching as many as the number of stitches specied by the function
setting No. 31 has been performed.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info