614555
36
Zoom out
Zoom in
Previous page
1/51
Next page
– 34 –
Input function list
Function
code
Abbre-
viation
Function item Remarks
0 noP No function (Standard setting)
1 HS Needle up / down compensating
stitching
Every time the switch is pressed, normal feed stitching by half
stitch is performed. (Same operation as that of up / down com-
pensating stitching switch on the panel.)
2 bHS Back compensating stitching Reverse feed stitching is performed at low speed while the
switch is held pressing.
3 EbT Function of canceling once reverse
feed stitching at the end of sewing
By depressing the back part of the pedal after pressing the
switch, operation of reverse feed stitching is canceled once.
4 TSW Thread trimming function This function is actuated as the thread trimming switch.
5 FL Presser foot lifting function This function is actuated as the foot lifter switch.
6 oHS One stitch compensating stitching Every time the switch is pressed, one stitch stitching operation
is executed.
7 SEbT Function of cancel of reverse feed
stitching at start/end
By operating the optional switch, ineffective/effective can be
alternately changed over.
8 Ed Material edge sensor input This function works as the input signal of material edge sensor.
9 LinH Function of prohibiting depressing
front part of pedal
Rotation by pedal is prohibited.
10 TinH Function of prohibiting thread trim-
ming output
Output of thread trimming is prohibited.
11 LSSW Low speed command input This function works as low speed switch for standing sewing
machine.
12 HSSW High speed command input This function works as high speed switch for standing sewing
machine.
13 USW Needle lifting function UP stop motion is performed when switch is pressed during
DOWN stop.
14 bT Reverse feed stitching switch input Reverse feed stitching is output as long as the switch is held
pressed.
15 SoFT Soft start switch input The speed of stitch is limited to the predetermined soft-start
speed as long as the switch is held pressed.
16 oSSW One-shot speed command switch
input
This function works as one-shot speed command as long as
the switch is pressed.
17 bKoS Backward one-shot speed com-
mand switch input
Reverse feed stitching is performed in accordance with the
one-shot speed command as long as the switch is held
pressed.
18 SFSW Safety switch input Rotation is prohibited.
19 AUbT Automatic reverse feed stitching
cancellation/addition switch
Every time the switch is pressed, reverse feed stitching at sew-
ing start or reverse feed stitching at sewing end is canceled or
added.
20 CUnT Sewing counter input Every time the switch is pressed, the sewing counter value is
increased.
Connector No. Pin No. Display No. Function Initial value of No. 12
CN22 5 i.1 Reverse feed stitching switch input bT
CN20 7 i.2 Thread trimming switch input TSW
CN20 11 i.3 Low-speed revolution switch input LSSW
CN20 9 i.4 High-speed revolution switch input HSSW
CN20 5 i.5 Presser foot lifting switch input FL
Input function connectors
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info