614555
34
Zoom out
Zoom in
Previous page
1/51
Next page
– 32 –
Selection of the soft-start function (Function setting No. 1)
The needle thread may fail to interlace with the bobbin thread at the start of sewing when the stitching
pitch (stitch length) is small or a thick needle is used. To solve such problem, this function (called “soft-
start”) is used to limit the sewing speed, thereby assuring successful formation of the starting stitches.
* This setting is enabled when the thread clamp function is in the OFF state.
n.
1
0 : The function is not selected.
1 to 9 : The number of stitches to be sewn under the soft-start mode.
The sewing speed limited by the soft-start function can be changed. (Function setting No. 37)
n.
73
Data setting range : 100 to MAX. sti/min <10 sti/min>
(The MAX. value differs by machine head.)
Flicker reducing function (Function setting No. 5)
The function reduces ickering of the hand lamp at the start of sewing.
n.
5
0 : Flicker reducing function is ineffective
1 : Flicker reducing function is effective
(Caution) When the icker reducing function is set at the "Flicker reducing function is effective," the
startup speed of the sewing machine decreases.
Selection of the optional input/output function (Function setting No. 12)
For some of the input/output ports, their functions can be changed.
9. Detailed explanation of selection of functions
1) Select function setting No. 12 with the operat-
ing procedure of function setting procedures 1)
through 3). Press switch 󱀙.
2) Referring to the tables on p.33 to p.34, select dis-
play No. (i1 to i5, o1 to o3) corresponding to the
connector number to which optional input/output
is to be assigned, using and switches .
Then, press switch 󱀙.
3) Referring to the tables on p.33 to p.34, select
optional input/output signal to be assigned, using
and switches . Then, press
switch 󱀙.
4) Activate the signal using and switches
. Then, press switch 󱀙.
󱀙󱀘
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info