606954

JRpropo XG14 Manual

32
Zoom out
Zoom in
Previous page
1/112
Next page
30
▋Tail▋Curve【TAIL▋CURVE】
▋▋Function▋Explanation
This is the mixing between the pitch and the tail servo. It is also known as revolution mixing. It
allows setting of the mixing amounts separately up and down from the hovering point. Intermediate points can
also be established in each direction, so that setting can be freely carried out. In addition, Mixing Rate setting,
which is convenient for detailed adjustment of stunt positions, will also be possible. A maximum of 5 types of
setting curves can be set in each Flight Mode.
▋▋Setting▋Method
The numerical values of each point can be set. The initial input setting points are three points set to the slow,
center, and high sides. To add a point, set the stick to the desired position and press the “ADD” key. In the
situation where the point is to be deleted, this should be carried out using the “DEL” key. For the adjustment,
Set the point by stick and change the value by scrolling the dial for “IN” or “OUT”.
▋▋In▋Put▋Pitch▋(PITCH)
The pitch information that is input to the mixer can be selected from the following two types.
① “NORM”: This is the stick position referenced to the curve set using the Pitch Curve function.
② “ORIG”: This is the stick position itself not considering the pitch curve.
⿟ MIXING RATE ON STUNT MODE (RATE)
This display will be shown when the Flight Mode is set to a stunt position. Even though the graph and output
gures will remain the same, an action will be implemented that reduces the actual mixing amount by the
multiplier described below. This is the stunt mode common multiplier.
"1/1": × 1
"1/2": × 0.5
"1/4": × 0.25
"1/10": × 0.1
▋▋Caution▋Note
⿟ When using a Tail Lock Gyro (Heading Lock), this function will not be required since the tail will be
automatically corrected. Each of the setting values must be set to zero.
Function▋List
Helicopter
Airplane
DANGER
WARNING
CAUTION
Glider
Current Flight Mode Position
Pitch Input Correction
Mixing Rate
Adjusting point DisplayCurrent Flight Mode position
Point addition and deletion This changes the point connections to a Curve.
Numerical Display of the
Stick input Position and
output position
Each Adjusting point input
Position and output position
Copy function
Current Flight Mode Position
Pitch Input Correction
Mixing Rate
Adjusting point DisplayCurrent Flight Mode position
Point addition and deletion This changes the point connections to a Curve.
Numerical Display of the
Stick input Position and
output position
Each Adjusting point input
Position and output position
Copy function
XG14English.indd 30 2013/07/16 16:39
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo XG14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo XG14 in the language / languages: English as an attachment in your email.

The manual is 25,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info