30203

JRpropo PCM9X Manual

43
Zoom out
Zoom in
Previous page
1/48
Next page
41
4141
41
points can be moved independently to any desired servo position from 0 to
100%.
Assigning Channels
Using the scroll bar, move the cursor to the master channel. Press scroll bar
down to activate selection. Roll the scroll bar to select the desired channel.
Repeat this process to select the slave channel.
Origin Mixing
When origin mixing is activated any dual rate, exponential or other modifier
applied to the master channel is ignored on the slave channel. Therefore the
same dual rate, etc, modifiers are not present on the slave channel when a
command is inputted, they are only present on the master channel.
Operating with a Switch
Using the scroll bar, position the cursor on the SELECT function and
Press to select the desired switch for the particular program mix being used.
The default setting is for the mix to be permanently active (ON).
Activation by Throttle Stick Position
Click the scroll bar with THRO STK selected. Roll the scroll bar to select a
throttle stick activation position between 0% and 100% or to inhibit (INH).
Note that the stick resolution has 200 steps so that two clicks of the scroll bar
are required to change the percentage displayed.
Assigning Mix Values
Position the cursor on the desired “Point” and press. Increase or decrease the
mixing value using rolling action of the scroll bar or the CLR key. To activate
points 1,2,4 or 5 with “INH” displayed, press the scroll bar at that position to
display mixing value. Press the CLR key if you want to inhibit mixing.
Exponential Function
An exponential function allows you to "smooth" the selected curve. With the
cursor at the “point” position, use the scroll bar to select the EXP function
and press to activate exponential.
Standard Programmable Mixing (Mixers 3,4,5 and 6)
When activating the mix different mix values may be input for either switch
position (position 0 or position 1). Separate, different (if required) mix
percentages may be set for each side of neutral between 125% and –125%.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JRpropo PCM9X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JRpropo PCM9X in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info