467831
9
Zoom out
Zoom in
Previous page
1/20
Next page
9
Figure 11. Install Rear Log.
Logset Installation
Brick Kit Note: Install the optional Antique Brick Kit 155375
before installing the log set. See instructions supplied
with that kit. The GF 400 CF log set must be installed
before operating the burner. The log set includes four
log pieces, packaged inside the firebox, and a quantity of
ceramic embers.
To install the log set, remove the packaging and place
the parts inside the firebox as illustrated in the diagrams
below. Do not handle the log set with your bare hands.
Always wear gloves to prevent skin irritation from the
ceramic fibres.
THE CERAMIC FIBRE LOGS AND EMBERS CAN IRRITATE
YOUR SKIN. GENTLY WASH YOUR HANDS WITH WARM
SOAPY WATER AFTER HANDLING THE LOGS OR EMBERS.
The embers realistically simulate glowing coals when the
burner is operating. These should be spread evenly over
the burner plate and around the logs.
1. Engage the holes in the underside 0f the Right Log
with the peg in the burner skirt as in fig. 11.
2. Locate the Rear Log to overlap the Right Log and en-
gage with the pegs as in fig. 12.
3. Place the Left Log on the peg as in fig. 13.
4. Install Middle Log on the peg as in fig. 14.
5. Install the Cross-over Log on pegs as in fig. 15.
6. Position embers loosely and maintain 6mm clearance
from the burner skirt edges. DO NOT OBSTRUCT THE
PILOT ASSEMBLY OPENING and do not pile the embers
in front of the burner skirt edges. See fig. 16.
7. Lower the glass frame with the glass back into place
and engage the latches.
Figure 13. Install Left Log.
Figure 14. Install Middle Log.
Figure 12. Install Rear Log.
Figure 15. Install Cross-over Log.
Figure 16. Install Ember Stones.
DO NOT OBSTRUCT
PILOT AREA
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Jotul GF 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Jotul GF 400 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info