623882
35
Zoom out
Zoom in
Previous page
1/41
Next page
ENGLISH
35
CASSETTE RECORDER
Inserting and removing cassette
Set the FUNCTION switch to the TAPE position.
Open the cassette compartment (21) by pressing the / button (19).
Tighten the band somewhat and insert the cassette with the band upwards. The empty spool should be
located at the left. Close the cassette compartment until the cover audibly locks in.
Play/Pause: Start play by pressing the button (15). Press the button (20), to interrupt play.
Stop: End play by pressing the / button.
Fast forward and rewind: In order to fast forward or rewind the band, stop playback with the / button.
Then press the (18) or (16) button.
Press the / button again to open the cassette compartment and remove the cassette.
Cassettes can be used on both sides. If the cassette reaches the end of its play duration, remove the
cassette and rotate it 180 degrees on its vertical axle. Insert the cassette again in order to play the other
side.
Auto-Stop function: If the cassette has reached the end of its play duration, the cassette playback
switches off automatically. This is also the case for recording.
Recording onto cassette
You can record from radio or CD. When recording and copying, you should observe copyright laws.
Recording onto chrome (IEC II) and metal bands (IEC IV) is not possible. Use NORMAL (IECI) bands only.
Insert a blank cassette into the cassette compartment (21).
Press the button (20).
Press the button (14). The button (15) will be activated simultaneously.
Select the desired source with the FUNCTION switch (23).
In order to record from the radio, set the FUNCTION switch to AM or FM. Select the desired station with the
TUNING control (11). To start recording, press the button again.
In order to record from CD or USB device, set the FUNCTION switch to CD/AUX. Select a track and start the
playback with the button (9). To start recording, press the button.
In order to interrupt recording, press the button.
Press the / button (19) to end recording.
The recording is not influenced by the volume level.
Protection from deletions
For every new recording, the old recording is deleted.
You can protect the cassettes from accidental deletions or overwriting
by breaking off the safety flap on the upper front side of the cassette.
If you want to write over the cassette later, you can cover the hole
with adhesive tape.
JGC-RRMP-8310-IM-DE-EN-V1.indb 35 14/05/2010 3:50 PM
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC RRMP-8310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC RRMP-8310 in the language / languages: English, German as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info