623882
33
Zoom out
Zoom in
Previous page
1/41
Next page
ENGLISH
33
CD PLAYER
Programming track playback
You can program the CD player to play a sequence of up to 32 tracks. The playback list can only be
programmed in stop mode. Press the button (8), before beginning programming.
Press the PLAY MODE button (4) once to switch to programming mode. The number of the storage space
P01 and PROG are shown blinking on the display.
Select a CD track with the buttons / (6) and / (7). Store your selection with the PLAY MODE
button. The second storage space P02 is opened and can be occupied again as before.
Proceed as described above to program further tracks.
You can occupy up to 32 storage spaces. If all storage spaces are occupied, the display shows FUL.
Press the button (9) to play the program. PROG is then shown on the display.
Once all programmed tracks have been played, the device stops automatically.
Press the button (8) to end the program playback. The playback list remains in the storage. In the display,
the number of tracks and PROG is shown. You can play the same playback list again by pressing the
button (9).
By pressing the button (8) twice the playback list is deleted. The program is also deleted if you:
- open the CD tray (2),
- slide the FUNCTION switch (23) to another position,
- switch off the device with the power switch (29).
Note: The repeat function can be combined with the playing of a program. For this, read the Repeat function
section.
Playing MP3/WMA-CD
This device can play back CDs (CD-R and CD-RW) with MP3-/WMA files as well as all recorded audio CDs
(CD-DA). Other file extensions are not supported.
WMA files which have DRM copy-protection cannot be played by this device. NO is shown on the display if
you attempt to play DRM WMA files.
The playback functions for MP3/WMA-CD are largely identical to the functions for audio CDs. Therefore,
in the following section, only the differences when playing a MP3/WMA-CD and additional functions are
described.
Switch the device into CD playback mode and insert an MP3/WMA CD.
Since the MP3/WMA-CDs can contain significantly more tracks, it can take longer for the CD player to read
the entire contents directory.
On the display (17) the total number of tracks and the control display MP3 or WMA will be shown.
If the MP3/WMA-CD is in stop mode, keep the FOLDER button (5) pressed for approx. 2 seconds to the
see total number of directories. On the display, the total number of directories (e.g. 012 for 12 directories),
ALBUM, as well as a folder symbol will briefly be shown blinking.
You can select a certain directory and start the playback of a track from this directory. CD in Stop Mode:
Hold the FOLDER button (5) pressed for approx. 2 seconds until the total number of directories blinks in the
display. Then briefly press the FOLDER button several times in order to select a directory. Finally press the
button (9) to start the playback of the first track in the selected directory.
JGC-RRMP-8310-IM-DE-EN-V1.indb 33 14/05/2010 3:50 PM
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JGC RRMP-8310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JGC RRMP-8310 in the language / languages: English, German as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info