Manual JBL Project K2 S9900 (page 31 of 42) (English, All languages)

793356

Zoom out

Zoom in

1/42

Project K2 S9900

Figure 12. Required voltage drive function from an external electronic crossover

for bi-ampliﬁcation of a K2 S9900 system.

Battery Installation

The network of this system utilizes the proprietary JBL “charge-couple method”

to activate capacitors by applying DC bias using battery power; this eliminates

unwanted distortions. Please refer to procedures below and install the supplied

battery in the battery holder.

Battery Installation Procedures:

1. Remove the battery access cover that is located above the input binding posts.

Use a small- or medium-tip Phillips screwdriver. Refer to Figure 9.

2. Remove the packaging ﬁlm from the battery, and place the battery into the

holder. The connector is the snap type and has polarities. Snap the battery

down after making sure that the polarity orientation is correct.

3. Reinstall the access cover. Only 006P rectangular 9V alkaline batteries may

be used. This battery can be easily found at electronic/appliance stores and

convenience stores.

Please Note:

• Biasisappliedtoreducedistortionfromthecomponents.Intheeventofaat

battery, there is no effect on the network circuitry, and there is no symptom

(e.g., no sound or intermittent sound from the system). However, you will

notice an effect on the level of distortion reduction in the bias network

circuitry after new batteries are installed. The batteries provide a voltage bias

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of JBL Project K2 S9900 in the language / languages: English, All languages as an attachment in your email.

The manual is 2.94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

JBL Project K2 S9900 Manual

Product: