793356
30
Zoom out
Zoom in
Previous page
1/42
Next page
30
Presence Level
This switch adjusts the attenuation applied to the 476Mg driver by approximately
0.3dB over the range of 1,500Hz to 3,000Hz. The vocal presence range is made
softer by reducing the level and stronger by increasing the level. This action is
accomplished by trimming attenuation resistors. No additional parts are inserted
in the signal path and there is no sonic deterioration caused by use of the control
(Fig. 11).
Figure 11. Adjustment range of the presence-level control. Upper band indicates
+0.5dB and lower band indicates –0.5dB.
Bi-Amp Switch
The bi-amp switch is located under the battery access cover and allows the
system to be set up for the use of an external low-level crossover. This switch
removes the passive components in the low- and high-frequency networks that
have to do with the actual crossover blending of the low-frequency and high-
frequency transducers. Level attenuation and equalization circuits remain active.
In the case of the K2 S9900, the voltage drive required from an external
crossover network is very unusual and, in most cases, is not likely to be achiev-
able with standard crossover networks. It is for this reason that active bi-amplifi-
cation of the K2 S9900 is not advised (Fig. 12).
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Project K2 S9900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Project K2 S9900 in the language / languages: English, All languages as an attachment in your email.

The manual is 2.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info