793356
29
Zoom out
Zoom in
Previous page
1/42
Next page
Project K2 S9900
29
CHAPTER 7
Project K2 S9900 Switch Operations
In addition to the input binding posts and connecting straps on the die-cast input
plate, the K2 S9900 has two level-adjustment controls, a bi-amp switch and a 9V
battery for biasing the signal capacitors. The battery is mounted under an access
cover which is held in place by two Phillips-head screws.
Figure 9.
HF Level
This switch adjusts the attenuation applied to the 476Mg (high-frequency unit)
by approximately 0.5dB over the range of 1,000Hz to about 15,000Hz. Midrange
and high-frequency sounds become softer by reducing the level and stronger by
increasing the level. This action is accomplished by trimming the main attenua-
tion resistors. No additional parts are inserted in the signal path and there is no
sonic deterioration caused by use of the control (Fig. 10).
Figure 10. Adjustment range of the high-frequency level control. Upper band
indicates +0.5dB and lower band indicates –0.5dB.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for JBL Project K2 S9900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of JBL Project K2 S9900 in the language / languages: English, All languages as an attachment in your email.

The manual is 2.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info