Manual Janome Memory Craft 6500P (page 50 of 78) (English)

472822

Zoom out

Zoom in

1/78

Automatic buttonhole

Machine Setting

Pattern: 12 (Mode 3)

Thread tension:1-5

Presser foot: Automatic buttonhole foot R

Foot pressure: 3

Pull the button holder of the buttonhole foot all the way

out.

Insert the fabric under the foot. Press the up/down

needle button twice.

Remove the fabric to the left to draw the needle thread

through the hole of the foot.

Insert the garment under the foot, and lower the needle

at the starting point.

Then lower the automatic buttonhole foot R.

1 Button Holder

2 Needle Thread

3 Bobbin Thread

NOTES:

You do not need to pull down the buttonhole lever.

If you wish to change the buttonhole width and density

press the stitch width and length buttons.

If there is a difference in stitch density between the right

and left rows of the buttonhole, refer to page 69 for

correction.

If you wish to sew a buttonhole longer than the size

permitted by the automatic buttonhole foot R, use satin

stitch foot F or buttonhole foot B (optional item).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 6500P in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 6500P Manual

Product: