Manual Janome Memory Craft 6500P (page 52 of 78) (English)

472822

Zoom out

Zoom in

1/78

Button Sewing

Machine Setting

Pattern: 08 (Mode 1)

Thread tension:3-7

Presser foot: Satin stitch foot F

Foot pressure: 3

Feed dog: Dropped

Unthread the needle thread.

Adjust the stitch width so that the needle enters both

holes in the button.

Place a button on the fabric and lower the needle by

turning the handwheel, so that the needle enters into the

left hole in the button.

Align the holes in the button with the slot on the foot and

lower it to hold the button in place.

Turn the handwheel to lower the needle into the right

hole in the button.

Adjust the stitch width if necessary.

Rethread the machine and sew about 10 stitches.

NOTE:

The LCD screen shows a warning to raise the feed dog,

but depress the foot control again to start sewing.

Raise the presser foot and remove the fabric.

Trim both needle and bobbin threads at the beginning.

Cut both threads leaving 20 cm (8”) tails.

Pull the bobbin thread to bring the needle thread to the

wrong side of the fabric then knot the threads.

1 Needle Thread at the Beginning

2 Bobbin Thread

3 Needle Thread

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 6500P in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 6500P Manual

Product: