Manual Janome Memory Craft 6500P (page 48 of 78) (English)

472822

Zoom out

Zoom in

1/78

Double layer buttonhole

To make a solid and sturdy buttonhole, sew another layer of

buttonhole over the previous stitches.

After the buttonhole is finished, simply start the machine

again.

Do not raise the foot or buttonhole lever.

The machine will sew another buttonhole in the following

order and stop automatically when it is completed:

Step 1: Straight stitching in reverse to go back to the

starting point

Step 2: Front bartack and left row

Step 3: Right row

Step 4: Back bartack and locking stitches at the end

Corded buttonhole

To sew a corded buttonhole, follow the same procedure as

a sensor buttonhole.

1 With the automatic buttonhole foot R raised, hook the

filler cord on the spur at the back of the buttonhole foot.

2 Bring the ends of cord toward you under the buttonhole

foot clearing the front end.

3 Hook the ends of the filler cord into the forks on the front

of buttonhole foot to hold them tight.

1 Spur

2 Forks

4 Lower the needle into the garment where the buttonhole

will start and lower the foot.

5 Lower the buttonhole lever and buttonhole foot. Start the

machine and sew the buttonhole over the filler cord.

The machine stops automatically when finished.

6 Remove the fabric from the machine and cut the sewing

threads.

7 Pull the left end of the filler cord to tighten it.

Thread the end of the cord through a darning needle and

draw it to the wrong side of the fabric and cut.

NOTES:

Set the stitch width in accordance with the thickness of the

filler cord used.

To cut the buttonhole opening, refer to page 45.

Step 1

Step 2

Step 3

Step 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 6500P in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 6500P Manual

Product: