Manual Janome Memory Craft 6500P (page 47 of 78) (English)

472822

Zoom out

Zoom in

1/78

5 Start the machine to sew the buttonhole.

The buttonhole will be automatically sewn.

Step 1: The machine will sew the front bartack and the left

row first.

Then it goes back to the starting point with straight

stitch.

Step 2: The machine will sew the right row.

Step 3: The machine will sew the back bartack, and the

machine will stop automatically.

To sew another buttonhole, press the thread cutter button

and raise the presser foot. Move the fabric to where the

next buttonhole to be sewn, then lower the foot and start

the machine.

6 When buttonhole sewing is finished, push the

buttonhole lever upward as far as it will go.

7 Remove the fabric and place a pin just below the

bartack at each end to prevent accidentally cutting

stitches. Cut the opening with the seam ripper.

Use an Eyelet puncher to open a keyhole buttonhole.

9 Seam Ripper

10 Eyelet Puncher

Step 1

Step 2

Step 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 6500P in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 6500P Manual

Product: