Manual Janome Memory Craft 6500P (page 45 of 78) (English)

472822

Zoom out

Zoom in

1/78

Sensor buttonholes

Machine Setting

Pattern: 11 (Mode 3)

Thread tension:1-5

Presser foot: Automatic buttonhole foot R

Foot pressure: 3

NOTES:

Buttonholes 11 and 13 to 17 are sensor buttonholes.

The size of a buttonhole is automatically set by placing a

button in the rear of automatic buttonhole foot R.

The button holder of the foot takes a button size of 0.5 cm

(3/16 ”) to 2.5 cm (1”) in diameter.

It is sometimes necessary to change buttonhole size to

match certain heavy or specific fabrics and threads.

Make a test buttonhole on an extra piece of the fabric to

check your settings.

The preset width of the buttonhole is suited for ordinary

buttons.

Apply an interfacing to stretch or fine fabrics.

To sew

1Press the up/down needle button to raise the

needle.

Attach the automatic buttonhole foot R snapping the

pin into the groove of the foot holder.

1 Groove

2 Pin

2 Pull the button holder to the back, and place the

button in it. Push it together tightly on the button.

NOTE:

If the button is extremely thick, make a test buttonhole on

an extra piece of the fabric.

If it is difficult to fit the button through the test buttonhole,

you can lengthen the buttonhole by pulling the button

holder back a little. The length of the buttonhole will be

increased.

3 Button Holder

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 6500P in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 6500P Manual

Product: