602019

Janome Memory Craft 11000 Special Edition Manual

38
Zoom out
Zoom in
Previous page
1/112
Next page
39
Manual settings
Altering buttonhole width
Press the adjust key and the manual setting window
will open.
Press the “+” key to increase the buttonhole width.
Press the “–“ key to decrease the buttonhole width.
Press the OK key to register the settings.
Altering buttonhole stitch density
Press the “+” key to make the buttonhole stitches less
dense.
Press the “–“ key to make the buttonhole stitches
denser.
Corded buttonhole
To sew a corded buttonhole, follow the same
procedure as for the sensor buttonhole; refer to the
instructions on page 37.
Select the pattern B1.
With the Automatic buttonhole foot R raised, hook the
filler cord on the spur on the back of the buttonhole
foot.
Bring the ends of cord toward you under the
buttonhole foot clearing the front end.
Hook the ends of the filler cord into the forks on the
front of the automatic buttonhole foot R to hold them
tight.
1 Spur
2 Forks
Lower the needle into the garment where the
buttonhole will start and lower the foot.
Press the start/stop button or foot control to sew the
buttonhole.
Each side of the buttonhole and the bartacks will be
sewn over the cord. The machine stops automatically
when finished.
Remove the fabric from the machine and cut the
sewing threads only.
Pull the left end of the filler cord to tighten.
Cut the filler cord as close to the buttonhole as possible.
NOTES:
Set the stitch width in accordance with the thickness
of the cord used.
Cut the filler cord if it is stitched to the fabric and cannot
be pulled, cut the filler cord at both ends.
To cut the buttonhole opening, refer to the instructions
on page 37.
Adjust
5.0
0.45
3.4
OK
Default
1
2
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 11000 Special Edition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 11000 Special Edition in the language / languages: English as an attachment in your email.

The manual is 18,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info