602019

Janome Memory Craft 11000 Special Edition Manual

37
Zoom out
Zoom in
Previous page
1/112
Next page
38
Automatic (square) buttonhole
Select pattern B2.
Pull the button holder all the way out.
Mark the buttonhole position on the fabric. Insert the
fabric under the foot. Press the up/down needle button
twice. Remove the fabric to the left to draw the needle
thread through the hole of the foot.
Place the garment under the foot, and lower the needle
at the starting point.
Then lower the automatic buttonhole foot R.
NOTES:
You do not need to pull down the buttonhole lever.
If you wish to change the buttonhole width and stitch
density press the adjust key.
If you wish to sew a buttonhole longer than the size
permitted by the automatic buttonhole foot R, use satin
stitch foot F.
Step-1
Sew the left side up to the required length of buttonhole
and stop the machine. Then press the reverse button.
Step-2
Start sewing again, and the machine sews back with a
straight stitch.
Stop the machine when you reach the starting point.
Then press the reverse button.
Step-3
Start sewing again, and the machine sews the front
bartack and right side of the buttonhole.
Stop the machine when you reach the ending point.
Then press the reverse button.
Step-4
Start sewing again, and machine sews the back bartack
and locking stitches then stops automatically.
After sewing is finished, a message will appear.
To make the next buttonhole, position the fabric and
start sewing again. The message dilsappears and the
machine will sew another buttonhole identical to the first
one then stop automatically.
To sew the next button hole in a different size press the
exit key .
NOTE:
To cut the buttonhole opening, refer to the instructions
on the previous page.
4
Buttonholes(B)
6
2
3
5
7
8
9
10
11
12
13
14
15 16
R
17 18 19 20 21
Auto
B
Auto BH
Pull Button Holder firml
y.
1
Restart for the same size.
Different size
X
R
Step 1
Sew to length required,
then press " ".
R
Step 2
Sew up to start position,
then press " ".
R
Step 3
Sew to the end,
then press " ".
R
Step 4
Machine stops when
BH is completed.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 11000 Special Edition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 11000 Special Edition in the language / languages: English as an attachment in your email.

The manual is 18,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info